Vishay IRFP064 Type N-Channel Power MOSFET, 70 A, 60 V Enhancement, 3-Pin TO-247AC IRFP064PBF

RS Stock No.:: 145-1878
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: IRFP064PBF
ผู้ผลิต:: Vishay

Vishay IRFP064 Type N-Channel Power MOSFET, 70 A, 60 V Enhancement, 3-Pin TO-247AC IRFP064PBF

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

ไม่พร้อมจำหน่ายในตอนนี้

ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด

RS Stock No.:: 145-1878
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: IRFP064PBF
ผู้ผลิต:: Vishay

คุณสมบัติ / Specifications

ข้อมูลทางเทคนิค / Technical Data Sheets

Legislation and Compliance

รายละเอียดสินค้า / Product Details

ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ

เลือกทั้งหมด	คุณลักษณะ	ค่า
	Brand	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	70A
	Maximum Drain Source Voltage Vds	60V
	Series	IRFP064
	Package Type	TO-247AC
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	9mΩ
	Channel Mode	Enhancement
	Maximum Gate Source Voltage Vgs	20V
	Typical Gate Charge Qg @ Vgs	190nC
	Maximum Power Dissipation Pd	300W
	Minimum Operating Temperature	-55°C
	Forward Voltage Vf	3V
	Maximum Operating Temperature	175°C
	Standards/Approvals	RoHS
	Width	5.31mm
	Length	15.87mm
	Height	20.82mm
	Automotive Standard	No

	เลือกทั้งหมด
	Brand Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 70A
	Maximum Drain Source Voltage Vds 60V
	Series IRFP064
	Package Type TO-247AC
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 9mΩ
	Channel Mode Enhancement
	Maximum Gate Source Voltage Vgs 20V
	Typical Gate Charge Qg @ Vgs 190nC
	Maximum Power Dissipation Pd 300W
	Minimum Operating Temperature -55°C
	Forward Voltage Vf 3V
	Maximum Operating Temperature 175°C
	Standards/Approvals RoHS
	Width 5.31mm
	Length 15.87mm
	Height 20.82mm
	Automotive Standard No

COO (Country of Origin):: MX

Vishay IRFP064 Series Power MOSFET, 60V Drain Source Voltage, 70A Continuous Drain Current - IRFP064PBF

This power MOSFET is a high-current switching transistor intended for demanding power-management roles where thermal resilience and low conduction loss are required. It operates as an N-channel enhancement device in a through-hole TO-247AC package, designed to be mounted on a heatsinked board and used where robust gate drive and substantial drain currents are needed.

Features and Benefits:

• 60V maximum drain voltage enables moderate-voltage power designs
• 70A continuous drain current supports heavy current loads
• 9mΩ low Rds(on) minimises conduction losses at high currents
• 300W power dissipation allows significant heat handling
• 190nC typical gate charge balances switching speed and drive effort
• ±20V gate tolerance permits standard gate-drive voltages

Applications

• Suitable for motor-control inverter stages requiring high current
• Ideal for switch-mode power supplies in industrial equipment
• Used with power amplifiers where thermal headroom is necessary
• Can be used for UPS and battery-conversion circuits
• Appropriate for high-current DC distribution and bus switching

What temperature range can it tolerate in continuous operation?

It is specified for operation from -55°C up to 175°C, supporting designs exposed to wide thermal variation.

How many connections does it present for PCB assembly?

The device uses a three-pin configuration in a through-hole format for secure soldered mounting.

What is the forward voltage characteristic relevant to diode conduction?

The device exhibits a forward voltage of 3V in its body-diode conduction mode, which affects reverse-recovery and conduction losses.

Is it intended for automotive-grade applications?

It is not classified as an automotive-standard device, so it should be evaluated against automotive qualification requirements before use in vehicle systems.