Discrete Semiconductors

We have a wide selection of discrete semiconductors across a range of transistors, diodes, rectifiers and modules. There are a number of brands to choose from including ON Semiconductors, Vishay, Infineon and DiodesZetex, amongst others.

What is a discrete semiconductor?

A discrete semiconductor is basically the opposite of an integrated circuit. It is an individual circuit that serves only one function as a single semiconductor, as opposed to multiple semiconductor components that you might find on a printed circuit board (PCB).

They are generally created for high power or frequency functions and as a result require specialist packaging.

What are some examples of discrete semiconductor devices?

Here are some individual device examples:

  • Thyristors: this type of semiconductor is often used as a switch running specific amounts of current through them
  • Zener diodes: these discrete devices are the most common type of component for voltage regulation
  • Bipolar transistors: carry both positive and negative charges in analog circuits
  • Bridge rectifiers: named so as they are built in specific configuration from diodes
  • MOSFET transistors: metal oxide semiconductor field effect transistors are widely used for switching and amplifying signals
  • TRIACs: are bidirectional switches allowing current in both directions
  • JFET transistors: junction field effect transistors are voltage controlled and as a result provide resistance
  • Rectifier & Schottky diodes: capable of very fast switching with low voltage drops
  • DIACs: often used for triggering thyristors
  • Varactor diodes: found in everyday common appliances and are controlled by the voltage applied through them

What can discrete semiconductors be used for?

As they are the most basic parts of engineering, there are a wide range of uses, in both industrial and consumer applications:

  • Space saving: a Darlington transistor takes up less space than two transistors
  • Triggers: a DIAC can be used to trigger a TRIAC
  • Application switching: JFET transistors are often used in this way
  • Analogue & digital: MOSFET transistors can be used in both ways
  • Power controllers: Thyristors are often used for just this purpose
  • Voltage regulator: Zener diodes are most commonly used for these types of tasks
Related Products
Integrated solutions to save board space. Incorporating a ...
Integrated solutions to save board space. Incorporating a resistor-equipped PNP transistor with two diodes on one chip, our dedicated constant current source device is housed in a SOT353 package. Reducing board space and component count, it provides stabilized output current ...
Ground-Fault Circuit Interrupter is a low-power controller for ...
Ground-Fault Circuit Interrupter is a low-power controller for AC-receptacle, that detect hazardous current paths to ground and ground to neutral faults. The circuit interrupter then disconnects the load from the mains power line before a harmful or lethal shock occurs. ...
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
Bipolar Junction Transistors (BJT) broad range provides complete ...
Bipolar Junction Transistors (BJT) broad range provides complete solutions for various circuit application needs. Innovative packages are designed for minimal size, highest reliability and maximum thermal performance.