Phoenix Contact, SFP 1-15/120AC Surge Protector 150V ac Maximum Voltage Rating 10 kA Maximum Surge Current Surge

ดู Surge Suppressor Units ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
RS Stock No.:
802-8390
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
2920683
ผู้ผลิต:
Phoenix Contact
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Phoenix Contact

Suppressor Type

Surge Protection Device

Product Type

Surge Protector

Maximum Voltage

150V ac

Mount Type

DIN Rail, Screw

Maximum Surge Current

10kA

Series

SFP 1-15/120AC

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

50°C

Standards/Approvals

EN 61643-11, IEC 61643-11

Depth

79mm

Height

93mm

Length

112mm

Hazardous Area Certification

No

PLUGTRAB PT- IQ Surge Protection System


PLUGTRAB PT-IQ intelligent and systematic surge protection system for measurement and control (MCR) technology. It is the first solution to offer direct early detection of damaged surge protective devices using a three-stage status display to indicate the state of the protective device/s. (Green - OK; Yellow - Performance limit reached and replacement recommended; Red - Overloaded and replacement required)

The design of the rugged PLUGTRAB PT-IQ surge protection module system is such that

it is not possible to incorrectly connect each module, it is easily extended with each controller monitoring and supplying up to 28 protective devices and each module locks securely in place it makes this system particularly suited to provide reliable protection in tough conditions.

Key features of the system are:-

Unique three stage indication system flags damaged as well as failed plugs

Energy efficient as the Green indicator can be turned off by the control unit

Suited for use in demanding environments

Incorrect connection is not possible due to voltage keying and protection against polarity reversal, ensuring error free installation

Space saving design as one device protects up to five signal lines

Conventional wiring is not required as power supply and status information is communicated by converting the individual DIN rail connections into a bus

Contact with DIN Rail is such that it is resistant to surge currents

DIN rail system controller can accommodate the monitoring and supply of up to 28 protective devices

Direct or indirect grounding connection options available to cover a wide range of applications

Surge Protection Devices, SPDs (DIN-rail)


Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

ลิงก์ที่เกี่ยวข้อง