Phoenix Contact, SFP 1-20/230AC Surge Protector 264V ac Maximum Voltage Rating 10 kA Maximum Surge Current Surge

ดู Surge Suppressor Units ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
RS Stock No.:
802-8330
Distrelec หมายเลขบทความ:
136-57-287
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
2859987
ผู้ผลิต:
Phoenix Contact
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Phoenix Contact

Product Type

Surge Protector

Suppressor Type

Surge Protection Device

Maximum Voltage

264V ac

Mount Type

DIN Rail, Screw

Maximum Surge Current

10kA

Series

SFP 1-20/230AC

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Standards/Approvals

IEC 61643-11, EN 61643-11

Depth

79mm

Length

112mm

Height

93mm

Hazardous Area Certification

No

Phoenix Contact Surge Protector, 10kA Surge Current, 230V AC Nominal Voltage - SFP 1-20/230AC - 2859987


Protect your equipment against sudden voltage spikes with this surge protector from Phoenix Contact. By blocking surge voltages up to 1kV and surge currents up to 10kA, the protector safeguards your hardware against power supply issues and lightning strikes.

For enhanced reliability, the device features an interference suppression filter that minimises disruption from EMI (electromagnetic interference). It emits a signal when it trips to alert you to potential hazards, making troubleshooting simple. The protector is designed for DIN rail mounting for ease of installation. It has a broad operating temperature range of -40°C to +70°C, making it suited to use in demanding environments.

• Meets EN 61643-11/A11 standards for reliable and effective protection against current surges

• Meets IEC 60664-1 standards for insulation coordination in low-voltage systems

• Accommodates conductors ranging in size from 28 to 16AWG for versatility

• IP20 (ingress protection) rating for protection against objects larger than 12mm in size

• Compact dimensions of 93 (height) x 112 (width) x 79mm (depth) to save space on the DIN rail

Phoenix Contact SFP TRAB EMC Filters


The Phoenix Contact SFP-TRAB series of EMC Filters have a combined protective circuit for absorbing transient surge voltages and high frequency interference voltages. This highly reliable series also features thermal monitoring of the protective circuit and disconnection status signal.

Surge Protection Devices, SPDs (DIN-rail)


Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

ลิงก์ที่เกี่ยวข้อง