TE Connectivity 500 Ω Wirewound Wirewound Through Hole Fixed Resistor 0.5 W 0.1 %

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

รับส่วนลดสำหรับการซื้อจำนวนมาก

เพิ่มอีก 50 ชิ้นเพื่อประหยัดได้ THB573.00

ดูตัวเลือกการกำหนดราคาในการซื้อปริมาณมาก

ยอดรวมย่อย 25 ชิ้น (จัดส่งในกล่อง)*

THB18,591.75

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB19,893.25

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
หมดสต็อกชั่วคราว
  • 13 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
  • เพิ่มอีก 400 ชิ้นจะส่งได้หลังจากวันที่ 26 พฤศจิกายน 2569 ไปอีกประมาณ 7 วันทำการ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง

ชิ้น
ต่อหน่วย
การประหยัด
25 - 49THB743.67-
50 +THB732.21THB573.00

*ตัวบ่งบอกราคา / price indicative

ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
RS Stock No.:
217-3239P
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
UPW50B500RV
ผู้ผลิต:
TE Connectivity
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

TE Connectivity

Resistance

500Ω

Product Type

Wirewound Through Hole Fixed Resistor

Power Rating

0.5W

Resistor Type

Precision

Tolerance ±

0.1%

Packaging

Box

Axial/Radial

Axial

Voltage

400V

Technology

Wirewound

Series

UPW50

Automotive Standard

No

Minimum Operating Temperature

-55°C

Pin Count

2

Maximum Operating Temperature

145°C

Standards/Approvals

No

Diameter

6.35mm

Length

12.7mm

Width

6.35mm

Temperature Coefficient

±3 ppm/°C

TE Connectivity UPW50 Series 0.5W Precision Wirewound Resistors


The UPW series of precision wirewound resistors from TE Connectivity exhibit high stability under load and severe environmental conditions. With temperature coefficients as low as to 1ppm, the UPW range of resistors are Ideal to use in a wide range of applications.

Featuring custom weld tabs and copper weld leads ensure the UPW series have a good mechanical and electrical connection between the element and the lead wires. Protection is given to the windings via of a layer of silicone RTV rubber. This allows movement of the windings during temperature cycling due to loads and to varying ambient temperatures. Outer protection is given by means of a hot transfer moulded epoxy compound which ensures an airtight coating with no trapped air.

The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.

• Custom weld tabs

• Copper weld leads

• 0.5W Power rating @ 125°C

• 10 Ω to 100k Ω resistance ratings available

• Full load stability of <50ppm @ 10000hrs, <100ppm @ 26000hrs

• Maximum temperature coefficient of ±5ppm/°C (-55 → 125°C)

• Limiting element voltage of 400V