Druck Unik 5000 Series Pressure Sensor 70 mbar 100 bar

ยอดรวมย่อย (1 ชิ้น)*

THB22,734.23

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB24,325.63

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 4 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB22,734.23

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
746-3571
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
A5074-TB-A1-CA-H1-PA 100 bar SG
ผู้ผลิต:
Druck
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Druck

Product Type

Pressure Sensor

Maximum Pressure Measurement

100bar

Minimum Pressure Measurement

70mbar

Accuracy

±0.2 %

Analogue Output

0 → 5 V

Maximum Supply Voltage

16V

Series

Unik 5000

Housing Material

Stainless Steel

Standards/Approvals

ATEX, BS EN 61000-6-1: 2007, BS EN 61000-6-2: 2005, BS EN 61000-6-3: 2007+A1:2011, BS EN 61000-6-4: 2007+A1:2011, BS EN 61326-1: 2013, BS EN 61326-2-3: 2013, EMC, RoHS

IP Rating

IP65

Response Time

10ms

Mount Type

Female Thread

Output Type

Analogue

Media Measured

Fluid

Maximum Operating Temperature

+80°C

Druck Unik 5000 Series Pressure Sensor, 100 bar Maximum Pressure, 0 to 5V Analogue Output - A5074-TB-A1-CA-H1-PA 100 bar SG


This pressure sensor measures fluid pressure and provides an analogue 0 to 5V signal for process monitoring and control. It is built with a stainless steel housing for use in industrial environments and is intended to operate continuously across a wide temperature range. The unit accepts a maximum supply of 16V and is designed for installations requiring a threaded connection.

Features and Benefits:


• IP65 ingress protection enabling use in dusty or wet areas
• ±0.2% accuracy delivering precise measurement results
• 70 mbar minimum span allowing detection of low pressures
• 100 bar maximum range supporting high-pressure systems
• Stainless steel housing resisting corrosion in fluid applications

Applications


• Suitable for hydraulic system pressure monitoring
• Ideal for industrial process control loops
• Used for fluid measurement in test benches
• Can be used with control panels requiring analogue feedback
• Used for installations needing a female-thread connection

What supply voltage must be used for correct operation?


The device is designed to operate from a supply of up to 16V.

Which environments can the sensor physically withstand?


The enclosure meets IP65 standards for protection against dust and water jets.

What media is this sensor intended to measure?


It is intended for measuring fluid pressures.

How does the output Interface with control equipment?


It provides an analogue 0 to 5V output compatible with typical process inputs.

ลิงก์ที่เกี่ยวข้อง