Festo MS series 40 μm G3/8 in 14 bar Air Filter 1700L/min max with Manual drain

ยอดรวมย่อย (1 ชิ้น)*

THB3,330.40

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB3,563.53

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อกของผู้ผลิต
  • พร้อมส่งจากวันที่ 10 ธันวาคม 2569
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB3,330.40

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
793-210
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
MS4-LF-AGC-E-R-M
ผู้ผลิต:
Festo
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Festo

Product Type

Air Filter

Filtration Size

40μm

Port Size

G3/8 in

Drain Type

Manual

Connection Thread Standard

G

Series

MS

Maximum Flow Rate

1700L/min

Seal Material

Nitrile Rubber (NBR)

Maximum Operating Pressure

14 bar

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

60°C

Standards/Approvals

ISO 8573-1:2010, RoHS

Model Number

8232834

Bowl Material

Polycarbonate

Filter Type

Sintered

COO (Country of Origin):
HU

Festo Series MS Air Filter, 40μm Filtration Size, 1700L/min Nominal Flow - MS4-LF-AGC-E-R-M, Numeric Part Number: 8232834


This Air filter is designed to condition compressed Air and inert gases in industrial pneumatic systems. It combines a centrifugal separator with a sintered element to remove condensate and particles, while a transparent polycarbonate bowl permits Visual inspection. The unit is intended for vertical mounting and operates across typical ambient and media temperatures encountered in factory environments.

Features and Benefits:


• 14 bar Maximum operating pressure gives broad system compatibility
• 40 μm Filtration size reduces particulate ingress into downstream equipment
• 1700 L/min Nominal flow maintains adequate throughput for small systems
• NBR Seal material ensures chemical resistance at contact points
• Manual drain design allows controlled condensate removal

Applications


• Used with pneumatic actuators in assembly lines
• Suitable for compressed Air supply to instrumentation
• Ideal for workshops requiring Visual condensate monitoring
• Can be used for inert gas conditioning in test rigs

What mounting orientation is required for correct operation?


It must be mounted vertically within ±5° to ensure proper condensate separation and drainage.

Which materials contact the process medium and what are they?


The sub-base and housing are die-cast aluminium, the bowl is polycarbonate, the separating plate is POM and Seals are NBR.

How does the design support condensate separation efficiency?


A centrifugal separator ahead of the sintered filter achieves condensate separation greater than 75% before fine filtration.

What temperature range can it tolerate during storage and use?


The device is rated for media, ambient and storage temperatures from -10°C to 60°C.

What standards relate to the purity and material restrictions applied?


It is suitable for compressed Air to ISO 8573-1:2010 and complies with RoHS and VDMA24364-B1/B2-L material requirements.

ลิงก์ที่เกี่ยวข้อง