Honeywell Pin Plunger Micro Switch, Right Angle PCB Terminal Terminal, 6A, 250 V, SPDT, IP40

ดู Micro Switches ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
RS Stock No.:
205-6118
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
ZM160C50A01
ผู้ผลิต:
Honeywell
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Honeywell

Actuator Type

Pin Plunger

Product Type

Micro Switch

Terminal Type

Right Angle PCB Terminal

Housing Material

PBT

Contact Configuration

SPDT

IP Rating

IP40

Operating Force

150g

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Microswitch Type

Subminiature

Contact AC Voltage

250V

Length

19.8mm

Depth

10.2mm

Mechanical Life

1000000min

Hazardous Area Certification

NO

Series

ZM1

Standards/Approvals

UL, RoHS, REACH, ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE

Width

6.4mm

COO (Country of Origin):
CN

Honeywell ZM1 Series Micro Switch, 6A Contact Current, IP40 - ZM160C50A01


This micro switch is a Compact electromechanical device designed to detect and interrupt circuits in PCB‑mounted equipment. It is intended for use where a small, precise actuator is required to provide single‑pole changeover switching within control and sensing assemblies across electrical and mechanical systems.

Features and Benefits:


• Pin‑plunger actuator for precise mechanical actuation and repeatability
• Right‑angle PCB terminals for straightforward board mounting and assembly
• Rated for 6A contact current to handle moderate load switching
• Operational range from −40°C to 125°C for wide temperature applications
• Subminiature construction enabling space‑saving designs
• Conforms to multiple safety standards to support regulatory acceptance

Applications


• Suitable for position sensing in industrial automation modules
• Ideal for limit switching in mechanical assemblies and actuators
• Used with control PCBs in consumer appliances and equipment
• Can be used for signal interruption in instrumentation panels

How many operation cycles can I expect from this switch?


The device is specified for 400 mechanical cycles, indicating suitability for intermittent or low‑duty applications.

What contact arrangement does it provide for circuit design?


It offers a single‑pole changeover contact configuration allowing one input to be routed between two outputs.

Which Terminal orientation is provided for PCB integration?


The switch uses right‑angle PCB terminals to facilitate low‑profile board mounting and soldering.

What approvals support its use in certified assemblies?


It carries recognitions including UL, cUL, ENEC to IEC 61058‑1, RoHS, REACH, CQC and CE, aligning with multiple regional standards.

ลิงก์ที่เกี่ยวข้อง