Fluke 377 FC Clamp Meter, 999.9 A 2.5 kA 1000 V dc 1000 V ac CAT IV, CAT III Non-Contact Voltage Detector

ดู Clamp Meters ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
RS Stock No.:
220-4445
Distrelec หมายเลขบทความ:
302-16-595
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
FLUKE-377 FC/E
ผู้ผลิต:
Fluke
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Fluke

Product Type

Clamp Meter

Maximum DC Current Measurement

999.9A

Resistance Resolution

10Ω

Maximum AC Voltage Measurement

1000V ac

Maximum DC Voltage Measurement

1000V dc

Maximum Resistance Measurement

60kΩ

Model Number

377 FC

Minimum Operating Temperature

-10°C

AC Current Resolution

1A

Resistance Measurement Accuracy

±1 % rdg + 5 Digits

DC Current Resolution

100mA

DC Current Accuracy

2 % rdg ±5 Digits

AC Current Accuracy

±3 % rdg + 5 Digits

DC Voltage Resolution

0.1 V (≤600.0 V);1 V (≤1000 V)

Clamp Meter Type

AC/DC Clamp Meter

DC Voltage Accuracy

1 % ±10 digits

Maximum Jaw Opening

34mm

AC Voltage Resolution

1V ac

AC Voltage Accuracy

±5 % rdg + 5 Digits

Maximum Operating Temperature

50°C

Height

47mm

Standards/Approvals

IEC 60529, IEC 613261, IEC 6132622, IEC 6155713, IEC 610101

Weight

363g

Width

86mm

Length

274mm

True RMS

Yes

Functions Measured

Frequency, AC Voltage, DC Current, DC Voltage, Resistance, Capacitance, AC Current

Safety Category Voltage

600V, 1V

Power Source

Battery

Maximum AC Current Measurement

2.5kA

Non-Contact Voltage Detector

Yes

Battery Life

200h

Safety Category Level

CAT IV, CAT III

Battery Type

AA

Display Type

LCD

COO (Country of Origin):
US

Fluke Clamp Meter, 2500A Maximum AC Current Measurement, 1000V Maximum AC Voltage Measurement - FLUKE-377 FC/E


This clamp metre is a battery-powered electrical tester designed to measure AC and DC currents along with multiple electrical parameters in industrial and field environments. It combines a non-contact voltage detector with true RMS measurement capability to assess complex waveforms and provides a broad measurement range suitable for high-voltage and high-current systems while meeting recognised IEC standards for electrical instruments.

Features and Benefits:


• True RMS measurement ensures accurate readings on distorted waveforms
• 2500A maximum AC current supports heavy-current diagnostics
• 1000V AC/DC rating permits testing up to high-voltage circuits
• 34mm jaw opening allows clamping around large conductors
• 200h battery life reduces interruptions during extended use
• Resistance, capacitance and frequency functions expand diagnostic scope

Applications


• Suitable for testing distribution switchgear and busbar currents
• Ideal for service engineers inspecting industrial motor supplies
• Used for verifying insulation and continuity in electrical panels
• Can be used for maintenance of renewable-energy inverter systems
• Used with live circuits where non-contact voltage detection is required

What accuracy can I expect for DC current measurements?


DC current accuracy is 2% of reading Plus 5 digits, with a resolution down to 0.1A.

Which safety categories and standards does it comply with?


It conforms to IEC standards including ingress and measurement safety requirements and is rated for CAT IV and CAT III voltage environments up to 1000V.

How does the display present measurement data?


Readings are shown on an LCD screen designed for numeric values with specified resolutions such as 0.1V for DC up to 600.0V.

What is the maximum resistance and its precision?


Resistance measurement goes to 60kΩ with accuracy of ±1% of reading Plus 5 digits.

Supplied with

• 377 FC Non-Contact Voltage True RMS Clamp Meter
• iFlex flexible current probe (18 inches; 48 cm)
• TL224 silicone insulated test leads
• TP175 adjustable length test probes
• AC285 grounding clip
• TPAK magnetic hanging kit, with 9 inch (23 cm) hanging strap
• Carrying case
• Quick reference guide

ลิงก์ที่เกี่ยวข้อง