Fluke 378 FC Clamp Meter, 999.9 A dc 2500 A ac 1000 V dc 1000 V ac CAT III 1000 V, CAT IV 600 V Non-Contact Voltage

ดู Clamp Meters ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
TH-PDP-Fluke
RS Stock No.:
220-4446
Distrelec หมายเลขบทความ:
302-16-596
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
FLUKE-378 FC/E
ผู้ผลิต:
Fluke
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Fluke

Product Type

Clamp Meter

Resistance Resolution

10Ω

Maximum DC Current Measurement

999.9A dc

Maximum AC Voltage Measurement

1000V ac

Maximum DC Voltage Measurement

1000V dc

Maximum Resistance Measurement

60kΩ

Model Number

378 FC

DC Current Accuracy

± 2 % rdg + 10 Digits

DC Current Resolution

100mA

Resistance Measurement Accuracy

±1 % rdg + 5 Digits

AC Voltage Accuracy

±1 % rdg + 5 Digits

Minimum Operating Temperature

-10°C

AC Current Resolution

100mA

AC Voltage Resolution

1V ac

Maximum Jaw Opening

34mm

DC Voltage Resolution

0.1 (≤600.0 V) V;1 (≤1000 V) V

AC Current Accuracy

2 %

Clamp Meter Type

AC/DC Clamp Meter

DC Voltage Accuracy

1 % rdg + 10 Digits

Maximum Operating Temperature

50°C

Standards/Approvals

IEC 610102032, IEC 6155713, IEC 610102033, IEC 610101, IEC 60529

Height

47mm

Weight

463g

Length

274mm

Width

86mm

True RMS

Yes

Functions Measured

Current, Voltage

Battery Type

AA IEC LR06

Power Source

Battery

Battery Life

200h

Safety Category Level

CAT III 1000 V, CAT IV 600 V

Safety Category Voltage

1000V, 600V

Non-Contact Voltage Detector

Yes

Maximum Temperature Measurement

50°C

Maximum AC Current Measurement

2500A ac

COO (Country of Origin):
US

Fluke Clamp Meter, 2500A Maximum AC Current Measurement, 1000V Maximum AC Voltage Measurement - FLUKE-378 FC/E


This clamp meter is a battery-powered instrument for measuring alternating and direct electrical parameters in industrial and field environments. It combines non-contact voltage detection with True RMS measurement capability to assess current and voltage accurately across high-energy systems while meeting relevant IEC safety and ingress standards.

Features and Benefits:


• True RMS measurement delivers accurate readings on non-sinusoidal signals
• Measures up to 2500A ac for high current systems
• 1000V capability with CAT III 1000V and CAT IV 600V safety levels
• 34mm jaw opening enables clamping around large conductors
• 0.1A resolution supports fine current measurement detail
• Battery life of 200 h for extended portable use

Applications


• Suitable for industrial power distribution fault finding
• Ideal for testing HV and LV electrical installations
• Used with motor and generator maintenance checks
• Can be used for site electrical safety verification
• Suitable for Rapid on-site voltage presence detection

What voltage ranges can it measure?


It can measure AC and DC voltages up to 1000 V each.

How precise are current measurements on this tool?


AC current accuracy is 2% with 0.1 A resolution and DC accuracy is ±2% rdg + 10 digits with 0.1 A resolution.

Which resistance and temperature capabilities are provided?


Resistance measurement extends to 60 kΩ with ±1% rdg + 5 digits accuracy and resistance resolution of 10 Ω while temperature measurements operate to a maximum of 50 °C.

What environmental conditions can it operate within?


The instrument functions between −10 °C and 50 °C and complies with IEC ingress and safety standards listed.

What power source does it use and how long will it run?


It uses AA IEC LR06 batteries and provides approximately 200 h of operation.

Supplied with

• 378 FC Non-Contact Voltage True-rms Clamp Meter
• iFlex flexible current probe (18 inches; 48 cm)
• TL224 silicone insulated test leads
• TP175 adjustable length test probes
• AC285 grounding clip (black, quantity one)
• TPAK magnetic hanging kit, with 9 inch (23 cm) hanging strap
• Carrying case
• Quick reference guide

ลิงก์ที่เกี่ยวข้อง