Festo Pneumatic 2 Port Actuated Ball Valve - Actuator

ดู Valve Actuators ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ เนื่องจากผู้ผลิตกำลังจะยกเลิกการผลิตสินค้านี้
RS Stock No.:
271-7834
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
VZBC-100-FF-16-22-F0710-V4V4T-PP240-R-90-C
ผู้ผลิต:
Festo
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Festo

Product Type

Actuated Ball Valve

Number of Ports Supported

2

Actuator Type

Pneumatic

Function

Actuator

Standards/Approvals

RoHS, ISO 8573-1:2010, VDMA24364, ATEX

Model Number

1913374

COO (Country of Origin):
DE

Festo Actuated Ball Valve, Pneumatic Actuator, 2 Ports Supported - VZBC-100-FF-16-22-F0710-V4V4T-PP240-R-90-C, Numeric Part Number:1913374


This actuated ball valve is a pneumatic semi-rotary valve unit designed to control flow in industrial systems. It operates as a two-way device for inline installation and is suitable for compressed air, inert gases and NEUTRAL fluids within defined temperature ranges. The assembly is engineered for use in potentially explosive atmospheres and for applications requiring corrosion resistance.

Features and Benefits:


• 2-way design delivers straightforward on/off flow control
• Pneumatic actuation enables fast remote cycling
• Rated PN16 withstands system pressures up to 16 bar
• Kv1414 provides high volumetric flow capacity
• PTFE-reinforced Seals allow wide media temperature range
• High-alloy stainless steel housing resists corrosive conditions

Applications


• Suitable for controlling compressed-air distribution lines
• Ideal for gas handling in hazardous zones
• Used with NEUTRAL fluid transfer systems
• Can be used for automated plant isolation tasks
• Suitable for water systems excluding water vapour use

What atmospheric zones is it authorised for?


It is certified for use in Zone 1, Zone 2, Zone 21 and Zone 22 atmospheres.

Which media and quality standard apply for the operating medium?


The valve accepts compressed Air conforming to ISO 8573-1:2010 and inert gases.

What temperatures can the assembly handle during operation?


Media temperatures range from -10°C to 200°C while ambient temperature limits are -10°C to 80°C.

What construction materials are used for wetted components?


The ball and housing are MADE from high-alloy stainless steel with PTFE-based seals.

Are there specific requirements for pilot or lubricated operation?


Lubrication is permitted and, if applied, must be maintained for continued lubricated operation.

ลิงก์ที่เกี่ยวข้อง