Eurotherm EPack DIN Rail Controller 2 Input, 1 Output Analogue 500V ac I² Control, True Power Control, Threshold Limit

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย (1 ชิ้น)*

THB38,877.36

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB41,598.78

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 3 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 - 4THB38,877.36
5 +THB38,099.81

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
800-6725
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
EPACK-1PH/63A/500V/XXX/V2
ผู้ผลิต:
Eurotherm
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Eurotherm

Product Type

Controller

Output Type

Analogue

Number of Inputs

2

Number of Outputs

1

Maximum Current

63A

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Control Type

I² Control, True Power Control, Threshold Limit Control, V² Control, Open-Loop Control with Feedforward+Trim

Terminal Type

Screw

Maximum Supply Voltage

500V ac

Energy measurement

Yes

Auxiliary Power Supply

100 to 500 V

Digital Comms

Ethernet (Dual Port RJ45), Modbus TCP

Maximum Voltage

500V ac

Display Type

TFT

Standards/Approvals

EMC 2004/108/EC, Low Voltage 2006/95/EC, GOST-R: Certificate of exemption, cUL: UL609747-4-1A and UL60947-1, EN 60947-4-3, CE: EN60947-4-3 and EN 60947-1, EN60947-1

Width

72 mm

IP Rating

IP10

Length

48mm

Series

EPack

Input Type

0 to 10 V, 2 to 10 V, Analogue Input, 4 to 20 mA, Digital Input, 0 to 20 mA

Mount Type

DIN Rail

Panel Depth

136.2mm

ไม่สอดคล้อง

COO (Country of Origin):
PL

EPack - Compact SCR Power Controller


EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)

24V & 500V versions available

Analogue input signal (voltage and current)

High definition 1.5" TFT display

Configurable via iTools (PC software) or front panel

V2, I2 or true power control

Energy usage measurement

Advanced load diagnostics

Integrated dual port Ethernet switch for “daisy chained” communications

Plug and play Ethernet communications with Zero configuration networking

Modbus® TCP protocol

Compact DIN Rail and bulkhead Mounting Format

ลิงก์ที่เกี่ยวข้อง