Eurotherm EPack DIN Rail Controller Voltage 500V ac/dc Open-Loop Control with Feedforward+Trim, Threshold Limit Control

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

ยอดรวมย่อย (1 ชิ้น)*

THB43,643.21

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB46,698.23

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
หมดสต็อกชั่วคราว
  • จะส่งได้หลังจากวันที่ 17 เมษายน 2569 ไปอีกประมาณ 7 วันทำการ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB43,643.21

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
790-3612
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
EPACK-1PH/63A/24V/XXX/V2
ผู้ผลิต:
Eurotherm
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Eurotherm

Output Type

Voltage

Product Type

Controller

Maximum Current

63A

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Terminal Type

Plug

Control Type

Open-Loop Control with Feedforward+Trim, Threshold Limit Control (Pa Reduction), I² Control, V² Control, True Power Control, Proportional Limit Control (by transfer V²↔I² or P↔I²)

Maximum Supply Voltage

500V ac/dc

Firing Mode

Intelligent Half Cycle, Fixed Burst Firing, Phase Angle, Variable Burst Firing

Digital Comms

Ethernet Dual Port/Modbus TCP

Diagnostics

Comms Network Fault, Open Thyristor Detection, Partial Load Failure, Over Current, Under/Over Voltage, Chop Off, Short Circuit Thyristor Detection

Energy measurement

Yes

Auxiliary Power Supply

100 to 500 V

Maximum Voltage

500V

Display Type

1.5 in TFT Colour

Length

48mm

IP Rating

IP10, IP20

Standards/Approvals

CE, GOST-R, UL, CCC, IEC 60947-4-3, cUL

Width

121 mm

Series

EPack

Mount Type

DIN Rail

Input Type

4 to 20 mA, Digital Input, 0 to 10 V, 2 to 10 V, 0 to 20 mA, One Configurable Analogue Input 0 to 5 V, Contact

Panel Depth

136.2mm

ไม่สอดคล้อง

COO (Country of Origin):
PL

EPack - Compact SCR Power Controller


EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)

24V & 500V versions available

Analogue input signal (voltage and current)

High definition 1.5" TFT display

Configurable via iTools (PC software) or front panel

V2, I2 or true power control

Energy usage measurement

Advanced load diagnostics

Integrated dual port Ethernet switch for “daisy chained” communications

Plug and play Ethernet communications with Zero configuration networking

Modbus® TCP protocol

Compact DIN Rail and bulkhead Mounting Format

ลิงก์ที่เกี่ยวข้อง