Fluke 718 -850 mbar to 6.895 bar Pressure Calibrator

RS Stock No.:: 351-2815
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: FLUKE-718 100
ผู้ผลิต:: Fluke

Fluke 718 -850 mbar to 6.895 bar Pressure Calibrator

ไม่พร้อมจำหน่ายในตอนนี้

ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด

RS Stock No.:: 351-2815
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: FLUKE-718 100
ผู้ผลิต:: Fluke

คุณสมบัติ / Specifications

ข้อมูลทางเทคนิค / Technical Data Sheets

Legislation and Compliance

รายละเอียดสินค้า / Product Details

ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ

เลือกทั้งหมด	คุณลักษณะ	ค่า
	Brand	Fluke
	Product Type	Pressure Calibrator
	Battery Type	Alkaline
	Maximum Pressure Measurement	6.895bar
	Minimum Pressure Measurement	-850mbar
	Accuracy	±0.015 %
	Resolution	1 mbar
	Model Number	718
	Data Logging	No
	Current Loop Measurement	Yes
	Display Type	LCD
	Power Source	Battery
	Weight	992g
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Standards/Approvals	No
	Width	94mm
	Length	216mm
	Height	66mm
	Hazardous Area Certification	NO

	เลือกทั้งหมด
	Brand Fluke
	Product Type Pressure Calibrator
	Battery Type Alkaline
	Maximum Pressure Measurement 6.895bar
	Minimum Pressure Measurement -850mbar
	Accuracy ±0.015 %
	Resolution 1 mbar
	Model Number 718
	Data Logging No
	Current Loop Measurement Yes
	Display Type LCD
	Power Source Battery
	Weight 992g
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Standards/Approvals No
	Width 94mm
	Length 216mm
	Height 66mm
	Hazardous Area Certification NO

สถานะRoHS: ได้รับการยกเว้น

COO (Country of Origin):: CN

Fluke Pressure Calibrator, ±0.015% Accuracy, 7 Bar Maximum Pressure Measurement - FLUKE-718 100

This pressure calibrator is a handheld instrument designed to provide a compact, battery-powered solution for calibrating transmitters, gauges and switches in field and workshop settings. It combines a pressure source with milliamp measurement capability and an integrated pump that resists fluid ingress, allowing technicians to generate and measure pressure while powering loop devices.

Features & Benefits

• ±0.015% mA accuracy for precise current loop verification
• Pressure range from -850 mbar to 7 bar for wide coverage
• High-resolution 0.1 mbar resolution for fine pressure discrimination
• LCD display showing simultaneous pressure and current readings
• Battery operation delivering up to 20 h typical use per set of batteries
• Integrated pump with serviceable valve assembly for field cleaning

Applications

• Suitable for commissioning and calibrating pressure transmitters on site
• Ideal for testing and adjusting pressure switches in process systems
• Used for functional verification of gauges across -850 mbar to 7 bar
• Can be used for loop-powered sensor checks and mA calibration
• Used with non-corrosive gases for field pressure validation

What battery type does it use and how many are required?

It uses alkaline 9V cells and requires two batteries to power all functions.

How does the pump cope with accidental fluid exposure?

The pump features protective check valves and a removable valve assembly enabling in-field cleaning using isopropyl alcohol and simple tools.

What measurement capability exists for current loops?

It measures 0 mA–24 mA with 0.001 mA resolution and an accuracy of 0.015%+1 count and can drive 20 mA into 1000 Ω when battery voltage exceeds 6.8 V.

Which pressure units and ranges are supported via the built-in pump?

The instrument supports multiple units including psi, bar, mbar, kPa, inH2O and mmHg and covers negative pressures to -850 mbar up to its full-scale positive range.

What environmental limits should users observe during operation?

Operate between -10 °C and 55 °C with specified relative-humidity limits and up to 3000m altitude

storage extends beyond these values.

Supplied with

protective yellow holster, test lead set, crocodile clips, 9V alkaline battery (fitted)