Fluke 787B 787B Handheld Multimeter True RMS, 1 A, 1 A, 1000 V

ดู Multimeters ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
RS Stock No.:
134-7345
Distrelec หมายเลขบทความ:
300-88-979
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
FLUKE-787B
ผู้ผลิต:
Fluke
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Fluke

Product Type

Multimeter

Multimeter Type

Handheld

Display Type

Digital

Model Number

787B

Resistance Resolution

100mΩ

Functions Measured

AC Current, AC Voltage, DC Current, DC Voltage, Diode Test, Loop, Resistance

Maximum AC Voltage Measurement

1000V

Maximum Resistance Measurement

40mΩ

Maximum AC Current Measurement

1A

Maximum DC Voltage Measurement

1kV dc

Maximum DC Current Measurement

1A

True RMS

Yes

AC Voltage Accuracy

± 0.7 % + 2

AC Current Accuracy

±1 % rdg + 2 Count

DC Current Accuracy

±0.05 % rdg + 2 Digits

DC Voltage Accuracy

±0.1 % rdg + 1 Digits

DC Voltage Resolution

0.1 mV dc

DC Current Resolution

0.001mA dc

AC Current Resolution

0.001A ac

AC Voltage Resolution

0.1mV ac

Maximum Frequency

19.99kHz

Power Source

Battery

Minimum Operating Temperature

-20°C

Resistance Measurement Accuracy

±0.2 % rdg + 2 Digits

Maximum Operating Temperature

55°C

Battery Life

140h

Series

787B

Width

100mm

Standards/Approvals

No

Weight

600g

Length

203mm

Height

50mm

Safety Category Level

CAT III, CAT IV

Battery Type

AA Alkaline

Safety Category Voltage

1000V

สถานะRoHS: ได้รับการยกเว้น

COO (Country of Origin):
US

Fluke Multimeter, 19.99kHz Maximum Frequency, 140h Battery Life - FLUKE-787B


This handheld true RMS multimeter combines a precision digital multimeter with an mA loop calibrator to measure, source and simulate DC loop currents within industrial control systems. It is intended for field technicians working on process instrumentation and control loops where simultaneous current and percentage-of-scale readouts aid diagnostic and calibration tasks.

Features & Benefits


• ±0.05% DC current accuracy provides high-accuracy DC current meter performance
• AC measurement to 19.99kHz enables AC current 19.99 kHz multimeter capability
• 0.1% DC voltage accuracy supports precise voltage diagnostics
• 140h battery life offers a multimeter with 140h battery life for extended field use
• Internal sourcing of 0–20.000mA drives loops up to 24mA with 24V compliance
• True RMS measurement ensures correct readings on non‑sinusoidal signals

**Applications**


• Suitable for troubleshooting 4–20mA industrial control loops
• Ideal for calibrating transmitters and loop-powered instruments
• Used for verifying controller input scaling via simultaneous per cent readouts
• Can be used for frequency checks on signal carriers up to 20kHz
• Used with field devices where limited external loop supply is present

How does it handle sourcing and simulation in a live loop?


It can source 0.000–20.000mA from its batteries with 24V compliance and simulate currents when an external 15–48V loop supply is present, allowing both internal-drive and external-supply simulation.

What indications and modes assist in signal verification?


The instrument offers dual readouts of mA and per cent of scale Plus Min/Max/Average/Hold/Relative modes to capture transient behaviour and steady-state values.

How long will batteries last during sourcing compared with measurement?


Typical measurement operation yields about 140h from four AA alkaline batteries, while continuous sourcing at 12mA typically runs for around 10h.

What safety and environmental tolerances support industrial use?


It is rated for high-voltage exposure up to 1000V between any jack and earth, operates from -20°C to 55°C, and withstands random vibration and a 1m drop test.

Supplied with

TL71 premium test lead set, AC72 alligator clips, 4 AA alkaline batteries (installed) and quick reference guide

ลิงก์ที่เกี่ยวข้อง