Fluke 28EX Digital Digital Multimeter True RMS, 1000 V

ดู Multimeters ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
RS Stock No.:
760-0398
Distrelec หมายเลขบทความ:
176-08-790
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
FLUKE 28 IIEX
ผู้ผลิต:
Fluke
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Fluke

Product Type

Multimeter

Multimeter Type

Digital

Model Number

28EX

Resistance Resolution

10kΩ

Display Type

Digital

Functions Measured

AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Diode Test, Duty Cycle, Frequency, Resistance, Temperature

Maximum DC Voltage Measurement

1000V

Maximum AC Voltage Measurement

1000V

True RMS

Yes

DC Current Accuracy

±0.2 % rdg + 4 Digits

AC Voltage Accuracy

±0.7 % rdg + 4 Digits

DC Voltage Accuracy

±0.05 % rdg + 1 Digits

AC Current Accuracy

±1 % rdg + 2 Digits

DC Current Resolution

0.01A ac

AC Voltage Resolution

1V ac

DC Voltage Resolution

1 V dc

AC Current Resolution

0.01A ac

Maximum Frequency

200kHz

Minimum Operating Temperature

-15°C

Resistance Measurement Accuracy

±1 % rdg + 3 Digits

Battery Life

400h

Maximum Operating Temperature

50°C

Height

64mm

Length

198mm

Width

100mm

Standards/Approvals

No

Weight

700g

Safety Category Level

CAT IV

Safety Category Voltage

600V

Battery Type

AAA

สถานะRoHS: ได้รับการยกเว้น

COO (Country of Origin):
US

Fluke Multimeter, 1000V Maximum DC Voltage Measurement, True RMS Functionality - FLUKE 28 IIEX


This multimeter is an intrinsically safe, true‑RMS handheld instrument designed for use in hazardous gas zones and harsh external environments. It combines high‑resolution measurement capability with sealed protection against water and dust, enabling technicians in automation, electrical and process industries to perform precision diagnostics both inside and outside Ex areas.

Features & Benefits


• True‑RMS measurement for accurate readings on non‑linear signals
• Measures up to 1000V and 10 A for broad system coverage
• DC voltage accuracy ±0.05% for high‑precision measurements
• AC current accuracy ±1% rdg + 2 digits for dependable load checks
• Frequency measurement to 200 kHz to diagnose VSDs and switching supplies
• Battery life approx. 400 h using AAA cells for extended field use

**Applications**


• Suitable for checking VSD output and motor drive signals
• Ideal for commissioning and fault‑finding in hazardous zones
• Used for measuring capacitance in motor start/run circuits
• Can be used for temperature checks with compatible probes
• Suitable for leakage and high‑resistance conductance testing

How does the instrument handle transient events?


It captures Peak transients with a 250 μs capture window to Record brief spikes during switching events.

What display and visibility aids are provided for PPE use?


The instrument has a large digit display with a two‑level bright white backlight and backlit keypad buttons for low‑light conditions.

How are batteries and fuses accessed in the field?


A separate battery compartment allows AAA batteries and fuses to be replaced without affecting instrument calibration, noting batteries must be Ex‑approved for hazardous zones.

What safety and measurement categories does it meet?


It conforms to IEC measurement categories up to CAT III 1000V and CAT IV 600V and meets Ex certification standards for Zone 1/Division 1 gas areas.

Group and Category

28II Ex I.S Certification: IECEx Ex ia IIC T4 Gb, Ex ia IIIC T130 °C Db, Ex ia I Ma

ลิงก์ที่เกี่ยวข้อง