Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 24 V dc, 240V ac

ดู Monitoring Relays ทั้งหมด

ยอดรวมย่อย (1 ชิ้น)*

THB7,510.31

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB8,036.03

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 6 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB7,510.31

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
819-3239
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
K8AK-AW2 24VAC/DC
ผู้ผลิต:
Omron
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Omron

Product Type

Monitoring Relay

Electrical Phase

1

Contact Configuration

SPDT

Mount Type

DIN Rail

Minimum Current Sensed

0.1A

Switching Voltage

250V ac

Maximum Current Sensed

5A

Power Consumption

4.6VA

Current Sensitivity

Overcurrent, Undercurrent

Terminal Type

Screw

IP Rating

IP20

Time Delay

0.1 to 30 s

Relay Contact Current

5A

Supply DC Voltage

24 V dc

Minimum Operating Temperature

-20°C

Supply AC Voltage

240V ac

Maximum Operating Temperature

60°C

Length

100mm

Height

90mm

Series

K8AK-AW

Width

22.5mm

Standards/Approvals

EN 60947-5-1, RoHS, UL

Omron K8AK-AW Series Monitoring Relay, 24V Supply Voltage, 5A Relay Contact Current - K8AK-AW2 24VAC/DC


This monitoring relay provides overcurrent and undercurrent detection for single-phase control systems, used to supervise load current and trigger switching actions within industrial electrical panels. It mounts on DIN rail and connects via screw terminals, intended for installations where adjustable response timing and modest power draw are required.

Features and Benefits:


• Detects currents from 0.1A to 5A for precise load supervision
• Adjustable response time 0.1–30s to prevent nuisance trips
• SPDT contact for versatile control of alarms or breakers
• Rated switching voltage 250VAC for common control circuits
• Power consumption 4.6VA to minimise auxiliary loading
• Conforms to EN60947-5-1, UL and RoHS for standardised interoperability

Applications


• Suitable for motor protection against phase load loss or overloads
• Ideal for control panels monitoring pump current draw
• Used for conveyor systems to detect underload conditions
• Can be used for preventative maintenance alerts in machinery

What supply voltages will operate the unit?


It accepts DC or AC supply with 24VAC/DC and can also be used with a 240V AC supply rating for auxiliary circuits as required.

How is the device mounted and wired in a control cabinet?


It clips onto standard DIN rail and uses screw terminals for secure conductor connections compatible with typical industrial wiring practices.

What environmental limits should I observe during installation?


Operate within a temperature range of -20°C to 60°C and protect from dust and water ingress consistent with an IP20 enclosure rating.

What are the contact current capabilities for switching loads?


The relay contacts are specified for switching currents up to 5A, suitable for control-level loads and signalling circuits.

Standards

EN 60947-5-1 pollution level 2 installation category III, UL 508.
Terminal protection IP20.

ลิงก์ที่เกี่ยวข้อง