Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

RS Stock No.:: 111-3091
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: K8DT-AS2CA
ผู้ผลิต:: Omron

Omron Monitoring Relay, 1 Phase, SPDT, DIN Rail, 0.1A to 5A, 0V ac

ยอดรวมย่อย (1 ชิ้น)*

THB7,264.25

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB7,772.75

(รวมภาษีมูลค่าเพิ่ม)

ส่งฟรีหากซื้อเกิน ฿2,500.00

มีในสต็อก

6 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ

ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง

ชิ้น	ต่อหน่วย
1 +	THB7,264.25

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:: 111-3091
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: K8DT-AS2CA
ผู้ผลิต:: Omron

คุณสมบัติ / Specifications

ข้อมูลทางเทคนิค / Technical Data Sheets

Legislation and Compliance

รายละเอียดสินค้า / Product Details

ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ

เลือกทั้งหมด	คุณลักษณะ	ค่า
	Brand	Omron
	Product Type	Monitoring Relay
	Electrical Phase	1
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Minimum Current Sensed	0.1A
	Maximum Current Sensed	5A
	Power Consumption	2.5VA
	Current Sensitivity	Overcurrent, Undercurrent
	Terminal Type	Push-in
	Time Delay	250 ms
	IP Rating	IP20
	Supply AC Voltage	0V ac
	Relay Contact Current	0.1, 5A
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Width	17.5mm
	Series	K8DT-AS
	Standards/Approvals	EN 60947-5-1, UL 60947-5-1, RoHS
	Height	90mm
	Length	90mm

	เลือกทั้งหมด
	Brand Omron
	Product Type Monitoring Relay
	Electrical Phase 1
	Contact Configuration SPDT
	Mount Type DIN Rail
	Minimum Current Sensed 0.1A
	Maximum Current Sensed 5A
	Power Consumption 2.5VA
	Current Sensitivity Overcurrent, Undercurrent
	Terminal Type Push-in
	Time Delay 250 ms
	IP Rating IP20
	Supply AC Voltage 0V ac
	Relay Contact Current 0.1, 5A
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Width 17.5mm
	Series K8DT-AS
	Standards/Approvals EN 60947-5-1, UL 60947-5-1, RoHS
	Height 90mm
	Length 90mm

English Datasheet

Omron K8DT-AS Series Monitoring Relay, 100 to 240V Supply AC Voltage, 5A Maximum Current Sensed - K8DT-AS2CA

This monitoring relay provides single-phase current supervision for control circuits in industrial installations. It monitors both overcurrent and undercurrent conditions and operates from a wide AC supply, making it suitable for inline protection and control tasks where accurate sensing of load current is required.

Features and Benefits:

• Detects currents from 0.1 A to 5A and safeguards against deviations
• Adjustable response delay of 250 MS to prevent nuisance tripping
• SPDT contact configuration for straightforward control switching
• Push-in terminals for quick, tool-free wiring and maintenance
• Low power draw of 2.5 VA reducing auxiliary supply burden
• Rated for ambient use between -20 °C and 60 °C for varied sites

Applications

• Suitable for monitoring motor supply current in production lines
• Ideal for phase loss and load imbalance surveillance in panels
• Used with control contactors to initiate protective interlocks
• Can be used for process equipment current verification in workshops

What mounting method is provided for panel installation?

It clips onto a DIN rail, enabling Compact panel mounting and easy repositioning without additional hardware.

How does the relay behave with brief current fluctuations?

The built-in 250 MS time delay filters transient spikes, allowing short disturbances to pass without triggering an output.

What contact currents can be switched directly by the unit?

The relay contacts can carry control currents as low as 0.1 A and up to 5A for direct interfacing with small loads.

Which ingress protection and approvals relate to electrical safety?

The housing is rated IP20 and the unit conforms to applicable EN and UL standards Plus RoHS compliance.

Note

K8DT-AS allow use in either overcurrent or undercurrent mode.
K8DT-AW allow overcurrent and undercurrent monitoring simultaneously

Standards

EN 60947-5-1, UL 60947-5-1, IP 20 Terminals