Honeywell Short Lever Micro Switch, Solder Terminal, 6A, 250 V, SPDT, IP40

ดู Micro Switches ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
RS Stock No.:
205-6076
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
ZM160C10B01
ผู้ผลิต:
Honeywell
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Honeywell

Product Type

Micro Switch

Actuator Type

Short Lever

Terminal Type

Solder

Contact Configuration

SPDT

Housing Material

PBT

IP Rating

IP40

Operating Force

150g

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Contact AC Voltage

250V

Microswitch Type

Subminiature

Series

ZM1

Depth

10.2mm

Length

19.8mm

Hazardous Area Certification

NO

Standards/Approvals

ENEC to IEC 61058-1, cUL to UL 61058-1, CQC to GB 15092.1, CQC, CE, RoHS, REACH, UL

Width

6.4mm

Mechanical Life

1000000min

COO (Country of Origin):
CN

Honeywell ZM1 Series Micro Switch, 6A Switch Contact Current, Short Lever Actuator Type - ZM160C10B01


This micro switch is a Compact electromechanical actuator designed for precise switching in control and sensing circuits. It provides a short lever actuation for quick, accurate input and connects via solder terminals for PCB mounting. The device is suitable for environments requiring moderate ingress protection and extended temperature range operation.

Features and Benefits:


• Short lever actuator enables rapid, repeatable switching response
• Single-pole changeover contacts carry up to 6A for power handling
• Solder Terminal simplifies PCB assembly and secure electrical connection
• Rated for operation between -40°C and 125°C for varied thermal conditions
• Mechanical endurance of 400 cycles supports intermittent actuation tasks
• IP40 ingress protection reduces dust-related contact issues

Applications


• Suitable for limit switching in automated machinery
• Ideal for control panels and Interface assemblies on PCBs
• Used with electromechanical relays for signal routing and safety interlocks
• Can be used for position detection in small mechanical systems

What contact arrangement does it offer and how does that affect control circuits?


It uses a single-pole changeover contact configuration, allowing one input to switch between two outputs for simple make/break logic functions.

Which Terminal style is provided and what assembly methods suit it?


The switch has solder terminals, making it appropriate for reflow or hand-soldering on printed circuit boards where a permanent connection is required.

How does the ingress protection rating influence installation?


An IP40 rating means the device is protected against solid objects greater than 1mm but not against water, so it should be mounted in dry or enclosed locations.

What approvals and standards support its use in regulated equipment?


It holds multiple approvals to recognised standards including ENEC to IEC 61058-1, cUL to UL 61058-1 and CQC, alongside CE, RoHS and REACH compliance, allowing integration into certified electrical products.

ลิงก์ที่เกี่ยวข้อง