Eaton easyE4 Series Touch Screen HMI - 3.5 in, TFT Display, 320 x 240 pixel

ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้

ตัวเลือก

สินค้านี้ไม่มีจำหน่ายในขณะนี้ ลองดูสินค้าอื่นที่เราแนะนำ

Each

THB33,323.26

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB35,655.89

(รวมภาษีมูลค่าเพิ่ม)

RS Stock No.:
204-1337
Distrelec หมายเลขบทความ:
303-96-431
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
198513 XV-102-A0-35TQRB-1E4
ผู้ผลิต:
Eaton
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Eaton

Product Type

Touch Screen HMI

Series

easyE4

Display Type

TFT

Display Resolution

320 x 240 pixel

Number of Ports

2

Port Type

Ethernet

Onboard Memory

256MB

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Diagonal Display Size

3.5in

Backlighting

Yes

Length

136mm

Depth

30mm

Standards/Approvals

cUL, UL508

Width

100mm

IP Rating

IP65

Hazardous Area Certification

Zone 22, Category 3D

Display Colour

64 K

สถานะRoHS: ได้รับการยกเว้น

Eaton Touch Screen HMI, 136 (L) x 100 (W) x 30mm (D), 400MHz Processor Speed - easyE4 Series - 198513 XV-102-A0-35TQRB-1E4


Want to streamline your equipment's efficiency? Give it a nudge in the right direction with this touchscreen HMI from Eaton. It puts the monitoring and automation control of your easyE4 Series PLCs at your fingertips. The TFT display gives you quality visuals and fast response times. A built-in Ethernet interface offers the network support needed in complex setups. For efficiency, it has an onboard memory of 256MB and you can also extend this potential, thanks to an available SD card slot. Use human-machine interfaces like this in spots such as information points and medical facilities.

Features & Benefits


• Display type consumes minimal energy

• IP65 rating indicates it's dust-tight and can handle low-pressure water jets, so is safe to wipe down

• Wide operating temperature range of 0°C to +50°C for reliable use in challenging settings

How do I connect this touchscreen HMI?


It's a quick and simple job – just link the component up to your system with a USB cable.

Do I need to get additional software to use the HMI?


To get you started on the programming, this product includes the demo version of the GALILEO 10 software.

Note

Eaton formerly known as Moeller

ลิงก์ที่เกี่ยวข้อง