BEL POWER SOLUTIONS INC Q DC/DC Converter, 4V dc/ 15 mA, 36V dc Input, 14.4V Input 102 W, Rack, 71 °C Max Temp 71 °C Min

ดู DC-DC Converters ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
RS Stock No.:
716-6116
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
BQ2540-9RG
ผู้ผลิต:
BEL POWER SOLUTIONS INC
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

BEL POWER SOLUTIONS INC

Product Type

DC/DC Converter

Output Voltage 1

4V dc

Minimum Input Voltage

14.4V

Maximum Input Voltage

36V dc

Output Current 1

15mA

Output Current 2

15mA

Output Voltage 2

4V dc

Mount Type

Rack

Number of Outputs

2

Isolation Voltage

4.2kV dc

Maximum Output Power

102W

Standards/Approvals

CSA, EN, IEC, UL

Weight

500g

Depth

20mm

Length

172mm

Series

Q

Maximum Operating Temperature

71°C

Minimum Operating Temperature

71°C

Efficiency

89%

ไม่สอดคล้อง

Power-One 66W to 132W Single/Dual Output Regulated Isolated DC-DC Converter - Q Series


These Q Series compact DC-DC converters have all the necessary input and output filtering, signalling and protection features which are needed in the majority of applications. These converters provide flexible output power, high efficiency and reliabiity, low ripple and RFI noise levels, full input to input isolation, negligibe inrush current, overtemperature protection and over-/undervoltage lockout. These DC-DC conveters are designed for 19" DIN rack systems but can also be chassis-mounted using four M3 screws.

1 or 2 isolated outputs which can be series or parallel connected to provide pre-set voltages of 5.1 to 48Vdc

Particularly suitable for rugged environment

Excellent surge and transient protection

Compliant with European railway standards EN 50155 and EN 50121-3-2

Designed for 19" DIN-rack systems occupying 3U/4TE but can also be chassis-mounted by means of four screws

Fully enclosed in black-coated aluminium case acts as a heat sink and an RFI shield, ideal for cold wall mounting

Conformal coating provides very high levels of protection against humidity and conductive dust

Hot plug and current share for redundant applications

Low inrush current, hot swappable. 48V input products complaint with telecoms standard ETS 300132-2

Features include wide trim range, output OK signal and inhibit

Dimensions: H111 x W20 x L172 mm

Weight: 480g

Minimum isolation voltage: 4.2 kV

Regulation output 2


Vo2 depends upon the load distribution: If each output is loaded with at least 10% of Io nom, the deviation of Vo2 remains within ±5% of Vo nom. The figures 12, 13 and 14 on page 14 of the attached datasheet explain the regulation with different load distributions up to the current limit. If Io1 = Io2 or the two outputs are connected in series, the deviation of Vo2 remains within ±1% of the value of Vo nom, provided that the load is at least Io min.

Power-One - Euro Cassette, Isolated DC/DC Converters


ลิงก์ที่เกี่ยวข้อง