RS PRO Hand Ratcheting Crimp Tool for Coaxial Connectors

A simple and hardwearing ergonomic hand crimp tool for the creation of BNC and TNC coaxial cable assemblies. Producing 5.41 mm, 6.48 mm, 1.69 mm/.255in, 0.213in, 0.067in hexagon shaped crimps with the minimum of effort and suitable for either right or left handed operation.

RG 58, RG 59, RG 62, RG 71, RG108A/U, RG142B/U, RG210/U, RG223/U, RG302/U, RG58C/U, RG59B/U, RG62A/U, RG62B/U, RG71B/U, Thinnet (10Base2

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Looking to reduce costs but keep the same quality?

Pressmaster Crimp Tools