Amphenol Industrial, 97 Cable Clamp

From Amphenol, these olive drab backshell cable clamps are suitable for use with Amphenol MS series of circular connectors. The clamps are designed for use with jacketed cable, or wires protected by tubing.

• Stock No. 475-937 is a straight cable clamp, size 10
• Stock No. 475-943 is a straight cable clamp, size 14
• Stock No. 298-2617 is a straight cable clamp, size 16
• Stock No. 475-959 is a straight cable clamp, size 18
• Stock No. 475-965 is a straight cable clamp, size 20
• Stock No. 475-971 is a straight cable clamp, size 28
• Stock No. 475-987 is a straight cable clamp, size 28

The Amphenol 97 series olive Drab cable clamp is made of die-cast zinc and has maximum bundle diameter of 11.1mm. This straight backshell cable clamp is suitable for use with the Amphenol MS series of circular connectors.
97 (Olive drab)
Commercial grade threaded circular multi-pole connectors are designed to conform to the general requirements of MIL-C-5015. It satisfies the commercial and industrial demand for quality, reliability and low cost. The connectors have screw locking and complete interchangeability with other screw locking MIL-C-5015 types. All pins and sockets are solder bucket type.

Shell size is 14
Thread size of 5/8in
Screw affixing method

Jacketed cables
Unjacketed cables

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

97 (Olive Drab)

Commercial grade threaded circular multi-pole connectors designed to conform to the general requirements of MIL-C-5015 and satisfy the commercial and industrial demand for quality, reliability and low cost. The connectors are screw locking and fully interchangeable with other screw locking MIL-C-5015 types. All pins and sockets solder bucket type.