3M Cubitron™ II Ceramic Sanding Disc, 150mm, P250 Grit, 775L, 50 in pack

Achieve a smooth finish on your surfaces with this sanding disc from 3M. A grit size of P250 means it has a fine grade for removing small defects. The disc's abrasive surface uses ceramic minerals that are precision-shaped with pointed peaks. This allows it to cleanly slice through materials such as metal, composite and wood. Thanks to these uniform grains, the disc wears evenly to keep your sanding consistent, while the multiple holes minimise clogging from dust and debris as you work.

• Holes don't need aligning with those on your random orbital sander, speeding up disc changes
• Hook and loop backing provides easy and secure attachment
• Open coat type of construction for use on softer materials such as plastic, gelcoat and painted surfaces
• Maximum safe speed of 10,000rpm means it's suitable for professional and DIY power tools

• Woodwork and cabinet making
• Automotive repair
• Marine and aerospace industries

Using the 3M™ 775L outperforms conventional ceramic discs. Designed to be used with a 3M™ Hookit™ backing pad with an angle grinder or sander. This film wheel is well-suited to stock removal and is effective on a wide variety of materials, including metals, composites, gel coats and white woods.

A tough film backing means this abrasive disc is resistant to tears. Plus, resin bonding reduces wear, making it a long-lasting sanding solution.

Using 3M™ precision-shaped grain technology to offer a higher initial and durability to outlast conventional ceramic fibre discs. The grit wears evenly and with the abrasive staying cooler and sharper, the PSG abrasive lasts significantly longer than conventional ceramic discs. These discs will help to step up production with an improved output on both light and heavy stock removal.

The Hookit™ system from 3M™ provides a secure attachment with a hook and loop system. It allows for these Hookit™ discs to be quickly swapped out in seconds. The Hookit™ disc pad (150 mm backing pad - 456-2439) is sold seperately.

3M Precision Shaped Grain yields higher cut rates and excels at heavyweight applications

The 3M™ 775L film discs are great for surface removal on a variety of materials from metals, composites, gel coats and white woods. This could occur in industries such as farm and construction, automotive, ship and boat building, metal fabrication.

A. With a hook and loop backing, it works great with 3M™ Hookit™ backing pad. The pad allows for added pressure on stubborn removals.

A. The 3M™ 775L has Cubitron II™ abrasive blend that not only cuts twice as fast but lasts 6 times as long as conventional abrasive discs.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.