Surface Mount Fixed Resistors

Resistors are referred to as a Passive Component. Surface Mount Resistors are more commonly known as SMD (surface mount device) or SMT (Surface mount technology) Resistors. These resistors offer advantages in space saving on Printed Circuit Boards (PCB’s).


Some common package sizes are 0201,0402,0603,0805,1206,1210,2020,2512


SMD Resistors are used in large volumes and are the preferred choice in electronics equipment due to their small size and high reliability. SMD resistors are particularly used in telecommunication, automotive (AEC Q200 qualified) and medical equipment, they also found in personal devices, displays and advanced technology research instruments.


SMD Fixed Resistors


Surface mount fixed resistors are the most widely used resistors as they reduce the flow of the electrical current in circuits. Similar to water flowing along a pipe, the tap controls the flow of water, a resistor controls the flow of current. They work to a fixed value the resistance does not change in temperature or voltage. The most commonly used fixed resistors values are 100KΩ,10kΩ,100Ω, 10Ω


Types of surface mount fixed resistors


  • Thin Film Resistors have a higher precision than the thick film

  • Thick Film Resistors are used for general use due to a lower price point.

  • Moulded Wirewound Resistors offer higher power

  • Foil Resistors for ultra-high precision and really low-Temperature coefficient of resistance

  • Shunts (current sense) Low ohmic values for where current measurement is critical

  • Melf (cylindrical) offering superb pulse load capability

What are surface mount fixed resistors used for?


SMD fixed resistors are very compact and used in most electronic board design. Due to their compact size and the continuous development of ever smaller footprints, this has allowed for the development of ever smaller PCB designs and the ability to get more from the board. The resistors can assist in the reduction of component count on the board.


High Power / Surge / pulse protection


Many manufacturers offer a higher power alternative for the various packages they have available. As an example the 0603 resistor package can vary from 0.1W to 0.25W (rated dissipation 70°C). The higher power alternatives can be used in applications where there is a need to protect against surges / pulses.


What is the difference between Thin Film Resistors and Thick Film Resistors?


The main difference being that the thick film resistors have a paste fired on to the manufacturers chosen substrate. Thin film resistors as the name suggests has an extremely thin metal film that is generally vacuum deposited on to the manufacturers chosen substrate.


...
อ่านเพิ่มเติม อ่านน้อยกว่า

คัดกรอง / Filters

กำลังดูสินค้า 1 - 20 รายการจาก 31885 รายการ / Viewing 1 - 20 of 31885 products
ผลการค้นหาต่อหน้า / Results Per Page
รายละเอียดสินค้า / Description ราคา / Price Resistance Package/Case Technology Tolerance Power Rating Temperature Coefficient Automotive Standard Dimensions Length Depth Height Series Minimum Operating Temperature Maximum Operating Temperature
RS Stock No. 134-5524
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F10K
THB0.251
Each (On a Reel of 5000)
Units
10 kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 125-1192
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F10K
THB0.49
Each (In a Bag of 100)
Units
10 kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 134-5485
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG0805F10K
THB0.157
Each (On a Reel of 5000)
Units
10 kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 125-1189
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG0805F10K
THB0.33
Each (In a Bag of 100)
Units
10 kΩ 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 134-5511
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F330R
THB0.251
Each (On a Reel of 5000)
Units
330 Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 223-2186
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F330R
THB1.54
Each: (In a Pack of 50)
Units
330 Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 223-1981
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206ZR
THB1.318
Each: (In a Pack of 50)
Units
0 Ω 1206 Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 223-1997
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F10R
THB0.559
Each: (In a Pack of 50)
Units
10 Ω 1206 (3216M) Thick Film ±1% 0.25W 100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 134-5501
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F10R
THB0.439
Each (On a Reel of 5000)
Units
10 Ω 0402 (1005M) Thick Film ±1% 0.25W 100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 134-5500
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206ZR
THB0.219
Each (On a Reel of 5000)
Units
0 Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 678-9667
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRCW060310K0FKEA
Brand :Vishay
THB1.255
Each: (In a Pack of 50)
Units
10 kΩ 0603 Thick Film ±1% 0.1W ±100ppm/°C - - - - - CRCW -55°C +155°C
RS Stock No. 169-4216
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRCW060310K0FKEA
Brand :Vishay
THB0.129
Each (On a Reel of 5000)
Units
10 kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/°C - - - - - CRCW -55°C +155°C
RS Stock No. 901-3689
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.MCR10EZPF1000
Brand :ROHM
THB0.668
Each (In a Bag of 100)
Units
100 Ω 0805 (2012M) Thick Film ±1% 0.125W ±100ppm/°C - - - - - MCR -55°C +155°C
RS Stock No. 134-5516
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F1K0
THB0.251
Each (On a Reel of 5000)
Units
1 kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 125-1190
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG1206F1K0
THB0.462
Each (In a Bag of 100)
Units
1 kΩ 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - CRG -55°C +125°C
RS Stock No. 182-3603
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRCW060310K0FKEA
Brand :Vishay
THB0.265
Each (On a Reel of 1000)
Units
10 kΩ 0603 (1608M) Thick Film ±1% 0.1W ±100ppm/K AEC-Q200 - - - - CRCW -55°C +155°C
RS Stock No. 810-1678
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.ERJ6RBD1001V
Brand :Panasonic
THB1.346
Each (In a Bag of 100)
Units
1 kΩ 0805 (2012M) Thick Film ±0.5% 0.1W ±50ppm/°C AEC-Q200 - - - - ERJ -55°C +125°C
RS Stock No. 223-0427
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.CRG0805F1K0
THB1.599
Each: (In a Pack of 50)
Units
1 kΩ 0805 Thick Film ±1% 0.125W ±100ppm/°C - 2 x 0.5mm 2mm 1.25mm 0.5mm CRG -55°C +125°C
RS Stock No. 802-9494
Brand :RS PRO
THB0.098
Each (On a Reel of 5000)
Units
33 Ω 1206 (3216M) Thick Film ±1% 0.25W ±100ppm/°C - - - - - - -55°C +155°C
RS Stock No. 103-9269
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.ERJ6RBD1001V
Brand :Panasonic
THB0.627
Each (On a Reel of 5000)
Units
1 kΩ 0805 (2012M) Thick Film ±0.5% 0.1W ±50ppm/°C - - - - - ERJ -55°C +125°C
Related Products
ERJ B2 high-power surface mount chip resistors from ...
Description:
ERJ B2 high-power surface mount chip resistors from Panasonic feature a wide terminal construction. This allows for excellent heat dissipation and ensures the reliability of solder joints. AEC-Q200 qualifiedCurrent sensing.
74x Series Chip Arrays are single packaged devices ...
Description:
74x Series Chip Arrays are single packaged devices containing an array of homogeneous resistor elements. Arrays are typically used for convenience when several resistors occupy the same area in a layout. Multiple package sizes and circuit configurations help save placement ...
This SSTL_2 terminator network provides high performance resistor ...
Description:
This SSTL_2 terminator network provides high performance resistor termination for SSTL_2 Class I or Class II systems. Designed with a ceramic substrate, this device minimizes channel capacitance, a primary cause of reduced system performance. In addition, the BGA package eases ...
S4x Series Chip Arrays are designed to resist ...
Description:
S4x Series Chip Arrays are designed to resist sulfurization which occurs in high-sulfur environments. Arrays are typically used for convenience when several resistors occupy the same area in a layout. Multiple package sizes and circuit configurations help save placement costs ...