Fluke Test Probe, 2 mm Tip, 1 kV, 600 V, 2 mm Socket, 10A

Are you looking for a hassle-free way to test electrical circuits in tight work areas? Grab a pair of these FLUKE test probes. Attach them to your multimeter and use their 2mm tip width to squeeze into hard-to-reach spaces, such as recesses and closely spaced terminals. Thanks to their needle design, these components pinpoint the energy source to ensure accurate measurement of many values, including voltage, resistance, current and temperature. The stainless-steel tips fend off rust to keep your probes functioning in humid environments.

• Attachable to a banana connector for a quick setup

• Commercial vehicle workshops

Yes. As these test probes have CAT III 1000V and CAT IV 600V safety ratings, they withstand impulse voltages of up to 8000V to provide your system with additional electrical protection.

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Both test leads and probes available

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

CATII 1000V