Metcal SxP 2.5 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- RS Stock No.:
- 612-4360
- Distrelec หมายเลขบทความ:
- 182-01-408
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- SFP-CH25
- ผู้ผลิต:
- Metcal
รับส่วนลดสำหรับการซื้อจำนวนมาก
เพิ่มอีก 5 ชิ้นเพื่อประหยัดได้ THB786.05
ดูตัวเลือกการกำหนดราคาในการซื้อปริมาณมากยอดรวมย่อย (1 ชิ้น)*
THB888.23
(ไม่รวมภาษีมูลค่าเพิ่ม)
THB950.41
(รวมภาษีมูลค่าเพิ่ม)
ส่งฟรีหากซื้อเกิน ฿2,500.00
มีในสต็อก
- 98 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น | ต่อหน่วย | การประหยัด |
|---|---|---|
| 1 - 4 | THB888.23 | - |
| 5 + | THB731.02 | THB786.05 |
*ตัวบ่งบอกราคา / price indicative
- RS Stock No.:
- 612-4360
- Distrelec หมายเลขบทความ:
- 182-01-408
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- SFP-CH25
- ผู้ผลิต:
- Metcal
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Metcal | |
| Model Number | SxP | |
| Tip Shape | Chisel | |
| Product Type | Soldering Iron Tip | |
| For Use With | MFR-H1-SC2 | |
| Tip Series | SFP | |
| Tip Angle | 30° | |
| Tip Width | 2.5 mm | |
| Tip Length | 10mm | |
| Standards/Approvals | RoHS | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Metcal | ||
Model Number SxP | ||
Tip Shape Chisel | ||
Product Type Soldering Iron Tip | ||
For Use With MFR-H1-SC2 | ||
Tip Series SFP | ||
Tip Angle 30° | ||
Tip Width 2.5 mm | ||
Tip Length 10mm | ||
Standards/Approvals RoHS | ||
- COO (Country of Origin):
- US
Metcal Soldering Iron Tip, 10mm Length, 2.5mm Width - SFP-CH25
This soldering iron tip is a replaceable chisel-shaped tip designed for controlled soldering tasks in electronics. It is intended for use with compatible handheld soldering tools and offers a specific bevel suited to tasks requiring angled contact and defined heat transfer.
Features and Benefits:
• Chisel profile provides broad contact and precise heat delivery
• 30° angle enables angled access to tight joints
• 10 mm length permits stable thermal conduction along the tip
• 2.5 mm width supports fine yet robust solder bridges
• RoHS conformity limits hazardous substances in the component
• 30° angle enables angled access to tight joints
• 10 mm length permits stable thermal conduction along the tip
• 2.5 mm width supports fine yet robust solder bridges
• RoHS conformity limits hazardous substances in the component
Applications
• Suitable for precision component soldering in electronics assembly
• Ideal for angled joint soldering in dense layouts
• Used with compatible MFR-H1-SC2-style soldering handles
• Can be used for electronics repair requiring flat-tip contact
• Ideal for angled joint soldering in dense layouts
• Used with compatible MFR-H1-SC2-style soldering handles
• Can be used for electronics repair requiring flat-tip contact
How does the tip geometry affect heat transfer during work?
The chisel geometry concentrates thermal mass along the blade edge, allowing consistent conduction to the solder joint when contacting surfaces at an angle.
What factors determine suitability for small-pitch soldering?
Tip width and bevel determine contact area, a 2.5 mm blade limits contact to relatively small pads while retaining sufficient mass for steady heat.
How does length influence stability and handling during soldering?
A 10 mm blade length balances thermal capacity and rigidity, providing stable temperature retention without excessive Flex when applying pressure.
Which safety or material restriction applies to this component?
The component meets RoHS restrictions, indicating restricted levels of certain hazardous substances in its construction.
ลิงก์ที่เกี่ยวข้อง
- Metcal SxP 2.5 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 1.5 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 2 mm Chisel 10 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 2 mm Chisel 16.04 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 1 mm Chisel 9.2 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 3 mm Chisel 11 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 5 mm Chisel 7.6 mm Soldering Iron Tip for use with MFR-H1-SC2
- Metcal SxP 1.5 mm Hoof 11.6 mm Soldering Iron Tip for use with MFR-H1-SC2
