Weller PTAA7 (370°C) 1.6 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- RS Stock No.:
- 661-403
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- 4PTAA7-1
- ผู้ผลิต:
- Weller
ยอดรวมย่อย (1 ชิ้น)*
THB258.51
(ไม่รวมภาษีมูลค่าเพิ่ม)
THB276.61
(รวมภาษีมูลค่าเพิ่ม)
ส่งฟรีหากซื้อเกิน ฿2,500.00
มีในสต็อก
- 261 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น | ต่อหน่วย |
|---|---|
| 1 + | THB258.51 |
*ตัวบ่งบอกราคา / price indicative
- RS Stock No.:
- 661-403
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- 4PTAA7-1
- ผู้ผลิต:
- Weller
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Weller | |
| Product Type | Soldering Iron Tip | |
| Model Number | PTAA7 (370°C) | |
| Tip Shape | Bevel | |
| For Use With | TCP (series (old generation) | |
| Tip Series | PT | |
| Tip Width | 1.6 mm | |
| Tip Length | 33mm | |
| Standards/Approvals | UPC | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Weller | ||
Product Type Soldering Iron Tip | ||
Model Number PTAA7 (370°C) | ||
Tip Shape Bevel | ||
For Use With TCP (series (old generation) | ||
Tip Series PT | ||
Tip Width 1.6 mm | ||
Tip Length 33mm | ||
Standards/Approvals UPC | ||
สถานะRoHS: ได้รับการยกเว้น
- COO (Country of Origin):
- MX
Weller Soldering Iron Tip, 33mm Tip Length, 1.6mm Tip Width - 4PTAA7-1
This soldering iron tip is a bevel-shaped replacement element designed for use with older TCP handheld soldering tools. It provides a controlled heat-transfer surface for precision joining tasks and is suited to technicians working with small components where defined solder joints are required. The tip conforms to recognised product approval standards for compatibility and safety.
Features and Benefits:
• Bevel profile delivers accurate solder-flow control for fine joints
• Nominal operating temperature set at 370°C for consistent heating
• Tip width 1.6mm permits access to confined pads and leads
• 33mm overall length assists reach into recessed areas
• UPC-approved designation supports equipment conformity in installations
• Nominal operating temperature set at 370°C for consistent heating
• Tip width 1.6mm permits access to confined pads and leads
• 33mm overall length assists reach into recessed areas
• UPC-approved designation supports equipment conformity in installations
Applications
• Suitable for precision component soldering on dense boards
• Ideal for rework of small through-hole and surface-mount parts
• Used with legacy TCP handheld soldering stations
• Can be used for general electronics assembly requiring bevel geometry
• Ideal for rework of small through-hole and surface-mount parts
• Used with legacy TCP handheld soldering stations
• Can be used for general electronics assembly requiring bevel geometry
How does the tips temperature rating affect routine tasks?
The 370°C nominal temperature offers steady thermal output that reduces thermal cycling, aiding repeatable solder wetting on common alloys.
Will this fit later handheld models from the same manufacturer?
It is intended for compatibility with older TCP handheld units
fitting to later variants requires checking the tools tip-holding mechanism and dimensions.
What soldering behaviours does the bevel shape enable?
The bevel edge promotes controlled solder distribution along joint edges, improving fillet formation on small connectors and leads.
Are there handling considerations due to the tips length?
The 33mm length provides additional reach but may change the tools balance
users should verify ergonomic comfort during extended use.
ลิงก์ที่เกี่ยวข้อง
- Weller PTAA7 (370°C) 1.6 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTAA9 (480°C) 1.6 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTCC7 (370°C) 3.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (Series Old Generation)
- Weller PTF7 (370°C) 1.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTAA8 (425°C) 1.6 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTBB7 (370°C) 2.4 mm Bevel 34.5 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTF8 (425°C) 1.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)
- Weller PTCC8 (425°C) 3.2 mm Bevel 33 mm Soldering Iron Tip for use with TCP (series (old generation)

