RS PRO Female 4 way M12 to Male 4 way M12 Sensor Actuator Cable, 2 m

This product uses a neoprene O-ring for a tight, liquid-proof seal. Its brass nickel-plated coupling nut is resistant to corrosion and vibration, and its polyurethane (PUR) sheath means it's protected from industrial chemicals.

Part of the RS PRO range, this two-metre cable assembly has been tested for safety and quality. With an insulation resistance of >= 100 MΩ, it meets standards ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 for electrostatic discharge safety. Its IP67 rating means it's dust-proof and safe in one metre of water for up to half an hour. It's suitable for use at temperatures ranging from -25°C to +75°C.

This cable assembly is useful for applications including process control and commercial electronics.

• One female socket connector and one male plug connector

• Insulation resistance of >=100 MΩ for protection against electrostatic discharge

• Neoprene O-ring for a liquid-proof seal

• Brass nickel-plated coupling nut and gold-plated contacts for corrosion resistance

• 4-core cable

• Length of 2 m

• Outer diameter of 5.4 mm

• Cross-sectional area of 0.75 mm²

• AWG rating of 19

• Unshielded cable

• Minimum operating temperature of -25°C

• Maximum operating temperature of +75°C

• Voltage rating of 250 V

• IP67 waterproof rating in up to 1 m of water for 30 mins

• Current rating of 4 A