SICK Female 5 way M12 to Unterminated Free End Sensor Actuator Cable, 10 m

ดู Sensor & Actuator Cables ทั้งหมด

ยอดรวมย่อย (1 ชิ้น)*

THB1,032.89

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB1,105.19

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 68 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB1,032.89

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
225-3029
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
YF2A15-100VB5XLEAX / 2096241
ผู้ผลิต:
SICK
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

SICK

Product Type

Sensor Actuator Cable

Series

YF2A15-100VB5XLEAX

Jacket Material

Polyvinyl Chloride

Cable Length

10m

Jacket Colour

Grey

Number of Contacts A

5

Connector Gender A

Female

Connector Type A

M12

Connector Gender B

Unterminated

Connector Type B

Free End

Voltage

125V

Standards/Approvals

CE, UL

IP Rating

IP67

COO (Country of Origin):
DE

Sick YF2A15-100VB5XLEAX Series Sensor Actuator Cable, 10m Cable Length, 5 Contacts - YF2A15-100VB5XLEAX / 2096241


This sensor actuator cable provides a robust connection solution for industrial automation, linking M12 devices to controllers or field wiring via a female M12 plug to unterminated free ends. It is intended for use where reliable signal transmission and environmental protection are required across sensors and actuators in factory and process settings.

Features & Benefits


• Five conductors with practical 0.34mm² cross-section for control signals
• Rated for ≤125V allowing common sensor and actuator voltages
• IP65/IP66K/IP67 protection for wet and washdown environments
• PVC jacket in grey resistant to chemicals and flame-rated to VW1/FT1
• 10m length offering extended reach without additional joints
• Current capacity 4A to support typical device loads

Applications


• Suitable for connecting proximity sensors to PLC inputs in production lines
• Ideal for wiring actuators in automated assembly machinery
• used with distributed I/O modules requiring M12 female connections
• Can be used for sensor networks in washdown food-industry zones
• Suitable for retrofit cabling where free-end termination is needed

What connector types are provided on each end?


One end features a straight female M12, 5-pin, A-coded plug and the opposite end is supplied as flying leads for field termination.

How does the cable handle mechanical flexing?


For dynamic applications the minimum bending radius is greater than 10x the cable diameter, while stationary installations require greater than 5x diameter.

What temperature ranges are acceptable during operation?


The cable core is rated for flexible use from −5 °C to +80 °C, and for stationary routing from −30 °C to +80 °C, with the connector head rated to −25 °C to +85 °C.

Is shielding provided and how are terminations secured?


The assembly is unshielded and the connector employs a screw-type locking nut with a 0.6 Nm tightening torque and SW13 spanner flats.

What approvals and electrical characteristics are relevant for integration?


It carries CE and UL recognition with a rated impulse voltage of 1.5 kV, insulation resistance around 100 MΩ, and specific insulation resistance near 30 mΩ.

ลิงก์ที่เกี่ยวข้อง