STMicroelectronics High Side, High Side Power Switch IC 24-Pin, PowerSSO-24

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย 10 ชิ้น (จัดส่งในแบบแถบต่อเนื่อง)*

THB2,534.35

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB2,711.75

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
คำสั่งซื้อมูลค่าต่ำกว่า THB2,500.00 (ไม่รวมภาษีมูลค่าเพิ่ม) ค่าจัดส่งเพียง THB250.00
ไม่สามารถเข้าถึงข้อมูลสต็อกได้ในขณะนี้
ชิ้น
ต่อหน่วย
10 - 98THB253.435
100 - 248THB248.35
250 - 498THB243.275
500 +THB238.19

*ตัวบ่งบอกราคา / price indicative

ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
RS Stock No.:
239-5528P
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
IPS2050HTR
ผู้ผลิต:
STMicroelectronics
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

STMicroelectronics

Product Type

Power Switch IC

Power Switch Topology

High Side

Power Switch Type

High Side

Switch On Resistance RdsOn

50mΩ

Number of Outputs

16

Mount Type

Surface

Package Type

PowerSSO-24

Minimum Supply Voltage

8V

Pin Count

24

Maximum Supply Voltage

60V

Operating Current

5.6A

Maximum Operating Temperature

150°C

Minimum Operating Temperature

-40°C

Length

10.5mm

Height

2.47mm

Width

7.6 mm

Standards/Approvals

IEC 61000-4-4, IEC 61000-4-2, IEC 61000-4-5

Automotive Standard

No

Series

IPS2050H

The STMicroelectronics IPS2050H and IPS2050H-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A / 5.6 A steady state operating current. Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.

8 V to 60 V operating supply voltage range

Smart driving of capacitive load

Under-voltage lock-out

VCCover-voltage protection

Fast demagnetization of inductive loads

Per-channel overload and over-temperature protection

Case over-temperature protections

Ground disconnection protection

The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection. The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel.