SMC AS Series Speed Controller Pneumatic Elbow Threaded-to-Tube Adapter 1/8 in One-touch Fitting 8 mm

RS Stock No.:: 280-9161
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: AS2201F-G01-08A
ผู้ผลิต:: SMC

SMC AS Series Speed Controller Pneumatic Elbow Threaded-to-Tube Adapter 1/8 in One-touch Fitting 8 mm

ดูหมวดหมู่นี้

ยอดรวมย่อย (1 ชิ้น)*

THB563.05

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB602.46

(รวมภาษีมูลค่าเพิ่ม)

ส่งฟรีหากซื้อเกิน ฿2,500.00

มีสต็อกจำกัด

เพิ่มอีก 7 ชิ้นที่เหลือจะส่งจากวันที่ 25 พฤษภาคม 2569

ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง

ชิ้น	ต่อหน่วย
1 +	THB563.05

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:: 280-9161
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: AS2201F-G01-08A
ผู้ผลิต:: SMC

คุณสมบัติ / Specifications

ข้อมูลทางเทคนิค / Technical Data Sheets

Legislation and Compliance

รายละเอียดสินค้า / Product Details

ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ

เลือกทั้งหมด	คุณลักษณะ	ค่า
	Brand	SMC
	Product Type	Pneumatic Elbow Threaded-to-Tube Adapter
	Outlet Connection Type	One-touch Fitting
	Sub Type	Speed Controller
	Inlet Connection Size	1/8 in
	Outlet Connection Size	8 mm
	Series	AS
	Maximum Operating Pressure	1 MPa
	Minimum Operating Temperature	-5°C
	Material	Polybutylene Terephthalate
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Minimum Operating Pressure	0.1MPa
	Proof Pressure	1.5MPa

	เลือกทั้งหมด
	Brand SMC
	Product Type Pneumatic Elbow Threaded-to-Tube Adapter
	Outlet Connection Type One-touch Fitting
	Sub Type Speed Controller
	Inlet Connection Size 1/8 in
	Outlet Connection Size 8 mm
	Series AS
	Maximum Operating Pressure 1 MPa
	Minimum Operating Temperature -5°C
	Material Polybutylene Terephthalate
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Minimum Operating Pressure 0.1MPa
	Proof Pressure 1.5MPa

SMC Series AS Pneumatic Elbow Threaded-to-Tube adaptor, 1/8 inches Inlet size, 8mm Outlet size - AS2201F-G01-08A

This pneumatic elbow threaded-to-tube adaptor provides a Compact connection between a threaded inlet and a push-in tube outlet for pneumatic control systems. Designed for inline flow regulation in industrial automation, it links a 1/8 inches port to an 8mm tube using a threaded-to-one-touch Interface and is suitable for general pneumatic assemblies where space and quick tubing changes are required.

Features & Benefits

• Maximum operating pressure 1MPa delivers stable pneumatic performance
• Proof pressure 1.5MPa offers a margin against overpressure events
• Operating temperature range −5°C to 60°C supports varied ambient conditions
• Brass and PBT construction resists wear while reducing component weight
• One-touch 8mm outlet enables Rapid tube insertion and removal
• Meets RoHS for reduced restricted-substance content

Applications

• Suitable for valve manifolds in factory automation systems
• Ideal for pilot lines in pneumatic control cabinets
• Used with air-actuated cylinders requiring Compact fittings
• Can be used for instrumentation tubing in test rigs
• Suitable for retrofitting pneumatic distribution on production lines

What inlet and outlet connections does it provide?

The device accepts a 1/8 inches threaded inlet and terminates in a push-in 8mm tube connection for simple tubing attachment.

How does material selection affect performance?

Brass provides mechanical durability at the threaded joint while PBT offers chemical resistance and lighter mass at the push-fit end, balancing robustness and handling.

What pressure margins are available for safety considerations?

Normal service is at 1MPa with a separate proof pressure limit of 1.5MPa to verify integrity under short-term higher loads.

How should the fitting be used with regard to temperature?

Operate only within the specified thermal bounds from −5°C to 60°C to maintain sealing and material properties.

Is this suitable for quick maintenance procedures?

Yes

the one-touch outlet allows Rapid tube disconnects, reducing downtime during routine maintenance.