SMC AF40-D series 5 μm 1/2 in 10 bar Pneumatic Filter 6000L/min max

This pneumatic filter is a modular Air preparation unit designed to remove particulates and protect downstream equipment in compressed Air systems. It is intended for use in industrial automation and mechanical installations where controlled Air quality and reliable flow are required, and operates across typical ambient and pressure ranges for factory environments.

• 5μm element removes fine solids to protect valves and actuators
• 6000 L/min maximum flow supports high-throughput Air lines
• Polycarbonate bowl provides Visual fluid monitoring and lightweight construction
• G thread 1/2 in port ensures compatibility with BSPP pneumatic fittings
• Operating range to 60°C maintains performance in warm ambient conditions

• Suitable for pneumatic valve banks in assembly automation
• Ideal for supply lines to electronic control cabinets with Air-driven components
• Used with actuator manifolds requiring particulate-free Air
• Can be used for general workshop compressed Air servicing points

The unit functions across a working pressure span from 0.05 MPa to 1.0 MPa, with proof pressure rated at 1.5 MPa.

Condensate is collected in an integrated bowl with a drain port and a 45 cm³ nominal drain capacity for routine removal.

The bowl and its guard are polycarbonate, while the internal element provides the filtration media for particulate separation.

The device is rated for media and ambient temperatures between -5°C and 60°C when freezing is not present, allowing installation in most indoor industrial environments.