SKF SYNT 60 F Plummer Block House -, 60 mm ID

This plummer Block housing supports mounted bearings in rotating assemblies, providing a robust housing for radial shaft support in industrial drives and conveyance systems. It is designed to accommodate a cylindrical bore and to Interface with standard bolted mounts, enabling straightforward installation in machinery where controlled shaft alignment and bearing retention are required.

• Cast iron construction provides durability and vibration damping
• Eccentric locking collar allows secure shaft clamping without shims
• 156 kN dynamic load capacity supports heavy radial loads
• 166 kN static load rating resists high standstill forces
• 2,900 r/min limiting speed suits moderate-to-high rpm applications
• Two-bolt mounting with 16mm holes simplifies fixture alignment

• Suitable for conveyor drive shaft support in manufacturing plants
• Ideal for motor and gearbox bearing housings in automation lines
• Used with rotary equipment in electrical drive systems
• Can be used for rollers in material handling installations
• Used for support bearings in machine tool subsystems

The housing accepts cylindrical bores with an internal diameter of 60mm, enabling direct fitment of compatible cylindrical bearings.

The centre height of 80mm sets the shaft Axis above the mounting surface, enabling predictable alignment with mating equipment and straightforward coupling geometry.

Prepare a mount pattern with 230mm centre-to-centre hole spacing using two 16mm fasteners to secure the unit.

The overall length is 275mm with a housing height of 151mm, which determines required clearance around the bearing location.