Metrel MI-3125 Electrical Tester, , Earth Resistance Measurement
- RS Stock No.:
- 712-6023
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- MI-3125
- ผู้ผลิต:
- Metrel
ไม่พร้อมจำหน่ายในตอนนี้
ขออภัย เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกเมื่อใด
- RS Stock No.:
- 712-6023
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- MI-3125
- ผู้ผลิต:
- Metrel
คุณสมบัติ / Specifications
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Metrel | |
| Loop Impedance Test Type | 3 Wire | |
| Automatic RCD Test | Yes | |
| Model Number p | MI-3125 | |
| Non-Tripping | Yes | |
| Maximum Voltage Measurement | 550V ac | |
| Test Type | Continuity | |
| Earth Resistance Measurement | Yes | |
| IP Rating | IP40 | |
| Length | 230mm | |
| Width | 140mm | |
| Power Source | Battery | |
| Display Type | LCD | |
| Dimensions | 230 x 140 x 80mm | |
| Weight | 1kg | |
| Minimum Continuity Resistance | 0.01Ω | |
| Height | 80mm | |
| Maximum Continuity Resistance | 1999Ω | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Metrel | ||
Loop Impedance Test Type 3 Wire | ||
Automatic RCD Test Yes | ||
Model Number p MI-3125 | ||
Non-Tripping Yes | ||
Maximum Voltage Measurement 550V ac | ||
Test Type Continuity | ||
Earth Resistance Measurement Yes | ||
IP Rating IP40 | ||
Length 230mm | ||
Width 140mm | ||
Power Source Battery | ||
Display Type LCD | ||
Dimensions 230 x 140 x 80mm | ||
Weight 1kg | ||
Minimum Continuity Resistance 0.01Ω | ||
Height 80mm | ||
Maximum Continuity Resistance 1999Ω | ||
- COO (Country of Origin):
- SI
Metrel Multifunctional testers
The Metrel multifunctional tester is an appropriate device for the safety testing and installation on TT and TN system. The results, indications, measurement parameters and messages are clear, visible and easy to read due to the large graphic display with backlight. It contains integrated characteristics of fuses and RCDs for the automatic evaluation of results. The handling of the instrument is designed to be as simple and clear as possible. Each test has its individual help screen describing how to connect the instrument into the installation and how to perform measurements. This tester performs continuity, insulation, RCD, loop, line, voltage, frequency and phase sequence tests. It has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries.
Supplied With: Instrument EurotestCOMBO, test lead, 3 x 1.5m, Schuko-plug test cable, power supply adapter + 6 NiMH rechargeable batteries, Type AA, test probe, 3 pcs (blue, black, green), crocodile clip, 3 pcs (blue, black, green), set of carrying straps, short instruction manual, instruction manual on CD, handbook on CD and calibration certificate.
Features and Benefits
• Automated RCD testing procedure significantly reduces the test time
• Automatic polarity reversal on continuity test
• Built-in loop impedance tables allow automatic evaluation of the line / loop impedance results compared to the regulations
• Monitors all three voltages in real time
• Multi-system testing to test on single and multiphase TT and TN systems
• Two LED indicators for pass/fail evaluation of test results are placed on both sides of the LCD
• Upgrades can be made to the firmware to keep the unit up to date
• Wide range of insulation test voltages from 50V to 1000V, reading up to 1000mΩ
• Zs (RCD) function performs a loop impedance test without tripping the RCD
Applications
• Initial and periodic testing of domestic and industrial installations
• Testing of single and multiphase systems
Certifications
• AS/NZ 3760
• BS 7671
• EN 60364-4-41
• EN 61008
• EN 61009
• EN 61010-031
• EN 61010-1
• EN 61326
• IEC/EN 61557