SICK DBS60 Core Series Incremental Incremental Encoder 30V, 100 ppr ppr, HTL, TTL Signal, Solid Type, 10 mm Shaft
- RS Stock No.:
- 212-5624
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- DBS60E-S4FK00100 / 1088761
- ผู้ผลิต:
- SICK
ยอดรวมย่อย (1 ชิ้น)*
THB10,331.50
(ไม่รวมภาษีมูลค่าเพิ่ม)
THB11,054.70
(รวมภาษีมูลค่าเพิ่ม)
ส่งฟรีหากซื้อเกิน ฿2,500.00
มีในสต็อก
- 5 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น | ต่อหน่วย |
|---|---|
| 1 + | THB10,331.50 |
*ตัวบ่งบอกราคา / price indicative
- RS Stock No.:
- 212-5624
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- DBS60E-S4FK00100 / 1088761
- ผู้ผลิต:
- SICK
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | SICK | |
| Product Type | Incremental Encoder | |
| Encoder Technology | Incremental | |
| Series | DBS60 Core | |
| Pulses Per Revolution | 100ppr | |
| Maximum Revolutions | 9000rpm | |
| Output Signal Type | HTL, TTL | |
| Shaft Type | Solid | |
| Shaft Diameter | 10mm | |
| Interface Type | Incremental | |
| IP Rating | IP65, IP67 | |
| Terminal Type | Cable | |
| Maximum Supply Voltage | 30V | |
| Minimum Operating Temperature | -30°C | |
| Overall Depth | 44.35mm | |
| Standards/Approvals | EN 60068-2-27, EN 60068-2-6, EN 61000-6-2 and EN 61000-6-3, EN ISO 13849-1 | |
| Overall Height | 58mm | |
| Overall Width | 58mm | |
| Maximum Operating Temperature | 100°C | |
| Mount Type | Face | |
| Switching Frequency | 300kHz | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand SICK | ||
Product Type Incremental Encoder | ||
Encoder Technology Incremental | ||
Series DBS60 Core | ||
Pulses Per Revolution 100ppr | ||
Maximum Revolutions 9000rpm | ||
Output Signal Type HTL, TTL | ||
Shaft Type Solid | ||
Shaft Diameter 10mm | ||
Interface Type Incremental | ||
IP Rating IP65, IP67 | ||
Terminal Type Cable | ||
Maximum Supply Voltage 30V | ||
Minimum Operating Temperature -30°C | ||
Overall Depth 44.35mm | ||
Standards/Approvals EN 60068-2-27, EN 60068-2-6, EN 61000-6-2 and EN 61000-6-3, EN ISO 13849-1 | ||
Overall Height 58mm | ||
Overall Width 58mm | ||
Maximum Operating Temperature 100°C | ||
Mount Type Face | ||
Switching Frequency 300kHz | ||
- COO (Country of Origin):
- MY
SICK DBS60 Core Series Incremental Encoder, 100 Pulses Per Revolution, 10mm Shaft Diameter - DBS60E-S4FK00100 / 1088761
This incremental encoder provides rotary position feedback for motion control and measurement systems in industrial settings. Designed for face mounting with a solid 10mm shaft, it delivers electrical Pulse outputs for speed and position sensing and operates across a wide temperature range suitable for demanding environments.
Features and Benefits:
• 100 ppr resolution delivers precise incremental position feedback
• HTL and TTL outputs enable flexible Interface compatibility
• 300 kHz switching supports high-speed counting and control
• 9000 rpm rating permits use in fast-rotating equipment
• IP65 and IP67 protection allows operation in wet and dusty conditions
• Cable termination simplifies installation in fixed assemblies
• HTL and TTL outputs enable flexible Interface compatibility
• 300 kHz switching supports high-speed counting and control
• 9000 rpm rating permits use in fast-rotating equipment
• IP65 and IP67 protection allows operation in wet and dusty conditions
• Cable termination simplifies installation in fixed assemblies
Applications
• Suitable for conveyor speed monitoring and control systems
• Ideal for closed-loop motor speed feedback in drives
• Used with PLCs for shaft position sensing in packaging machinery
• Can be used for rotational measurement in test rigs and laboratory equipment
• Suitable for integration into robotic joint encoders for motion tasks
• Ideal for closed-loop motor speed feedback in drives
• Used with PLCs for shaft position sensing in packaging machinery
• Can be used for rotational measurement in test rigs and laboratory equipment
• Suitable for integration into robotic joint encoders for motion tasks
What electrical supply constraints should be observed?
The device accepts supply voltages up to 30V and must be used within that maximum to ensure correct signal levels.
How does it handle exposure to harsh mechanical conditions?
It conforms to shock and vibration standards EN60068-2-27 and EN60068-2-6 for resistance to impact and oscillatory motion.
Which environmental immunity standards are relevant to its electromagnetic behaviour?
It meets EN61000-6-2 and EN61000-6-3 criteria for industrial immunity and emission performance in typical installations.
What are the specified operating temperature limits for continuous use?
The unit functions between -30°C and 100°C, enabling deployment in both sub-zero and elevated-temperature locations.
How is the encoder mounted and connected in an installation?
It is designed for face mounting with a solid 10mm shaft and uses a cable Terminal for electrical connection.
ลิงก์ที่เกี่ยวข้อง
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V TTL Solid Type, 6 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 6 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 10 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 6 mm Shaft
- SICK DBS60 Core Series Incremental Incremental Encoder 30V HTL Solid Type, 6 mm Shaft