ams OSRAM AS5047U-HTSM Series Magnetic Hall Effect Sensor 5.5V, 1024 ppr ppr, Analogue Signal
- RS Stock No.:
- 200-9465
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- AS5047U-HTSM
- ผู้ผลิต:
- ams OSRAM
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
- RS Stock No.:
- 200-9465
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- AS5047U-HTSM
- ผู้ผลิต:
- ams OSRAM
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | ams OSRAM | |
| Product Type | Hall Effect Sensor | |
| Encoder Technology | Magnetic | |
| Series | AS5047U-HTSM | |
| Pulses Per Revolution | 1024ppr | |
| Maximum Revolutions | 4096rpm | |
| Output Signal Type | Analogue | |
| Interface Type | SPI, UVW, PWM | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | |
| Maximum Operating Temperature | 150°C | |
| Switching Frequency | 3059Hz | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand ams OSRAM | ||
Product Type Hall Effect Sensor | ||
Encoder Technology Magnetic | ||
Series AS5047U-HTSM | ||
Pulses Per Revolution 1024ppr | ||
Maximum Revolutions 4096rpm | ||
Output Signal Type Analogue | ||
Interface Type SPI, UVW, PWM | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | ||
Maximum Operating Temperature 150°C | ||
Switching Frequency 3059Hz | ||
- COO (Country of Origin):
- AT
The AS5047U is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. This new position sensor is equipped with a revolutionary integrated dynamic angle error compensation (DAEC™) with almost 0 latency at higher rotational speed. For increased signal quality at lower rotational speed, the dynamic filter system (DFS™) reduces transition noise. The robust design of the device suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial Interface with a CRC protection allows a host microcontroller to read 14-bit absolute angle position data from the AS5047U and to program non-volatile settings without a dedicated programmer. Incremental movements are indicated on a set of ABI signals with a maximum resolution of 16989 steps / 4096 pulses per revolution.
ลิงก์ที่เกี่ยวข้อง
- ams OSRAM AS5047U-HTSM Series Magnetic Hall Effect Sensor 5.5V Analogue Signal
- ams OSRAM AS5600-ASOM Series Magnetic Hall Effect Sensor 5.5V Analogue Signal
- SICK SFS/SFM60 Series Measuring Rotary Encoder 12V dc Analogue Signal 10 mm Shaft
- SICK SRS/SRM50 Series Measuring Rotary Encoder 12V dc Analogue Signal 15 mm Shaft
- SICK DFS60S Pro Series Safety Encoder Encoder 32V Analogue Signal 14 mm Shaft
- SICK SFS/SFM60 Series Measuring Rotary Encoder 12V dc Analogue Signal 15 mm Shaft
- SICK DFS60S Pro Series Safety Encoder Encoder 32V Analogue Signal 10 mm Shaft
- SICK DLS40E Series Incremental Incremental Encoder 4.5V Analogue Signal 10 mm Shaft
