Microchip ATTINY3226-SU, 16 bit AVR CPU, ATTINY3226 Microcontroller, 20 MHz, 32kB FLASH, 20-Pin SOIC

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย 40 ชิ้น (จัดส่งในหลอด)*

THB1,924.60

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB2,059.32

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 1,080 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
40 +THB48.115

*ตัวบ่งบอกราคา / price indicative

ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
RS Stock No.:
234-3721P
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
ATTINY3226-SU
ผู้ผลิต:
Microchip
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Microchip

Product Type

Microcontroller

Series

ATTINY3226

Package Type

SOIC

Pin Count

20

Device Core

AVR CPU

Data Bus Width

16bit

Program Memory Size

32kB

Maximum Clock Frequency

20MHz

RAM Size

3kB

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

22

Analogue Comparators

1

Maximum Expanded Memory Size

32kB

Maximum Operating Temperature

125°C

Standards/Approvals

RoHS

Minimum Supply Voltage

1.8V

Instruction Set Architecture

Harvard

Automotive Standard

AEC-Q100

ADCs

12 bit

Program Memory Type

FLASH

Number of Timers

4

The Microchip ATTINY3226-SU microcontroller of the tinyAVR® 2 family use the AVR® CPU with hardware multiplier, running at 20 MHz, with 32 KB Flash, 3 KB of SRAM and 256B of EEPROM available in a 20-pin package. The family uses the latest technologies from Microchip with a flexible and low-power architecture including an event system, Advanced digital peripherals and accurate analog features such as a 12-bit differential ADC with Programmable Gain Amplifier (PGA).

High-performance low-power AVR® CPU

Single-cycle I/O access

Two-level interrupt controller with vectored interrupts

Two-cycle hardware multiplier

Supply voltage ranges between 1.8V to 5.5V

32B of user row in non volatile memory that can keep data during chip-erase and be programmed while the device is locked

Write/erase endurance

Flash 10, 000 cycles

EEPROM 100, 000 cycles

Data retention: 40 years at 55°C

Power-on Reset (POR)

Brown-out Detection (BOD)

32.768 kHz Ultra-Low Power (ULP) internal oscillator

32.768 kHz external crystal oscillator

Single-pin Unified Program and Debug Interface (UPDI)

Three sleep modes

Idle with all peripherals running and immediate wake-up time

Standby with configurable operation of selected peripherals

Power-Down with full data retention

Host/Client Serial Peripheral Interface (SPI)

Host/Client Two-Wire Interface (TWI) with dual address match

Automated Cyclic Redundancy Check (CRC) flash memory scan

Watchdog Timer (WDT) with Window Mode, with a separate on-chip oscillator

-40°C to 85°C (industrial temperature)

-40°C to 125°C (extended temperature)