Microchip, 8 bit AVR, ATMEGA16U2 Microcontroller, 16 MHz, 16kB FLASH, 32-Pin TQFP

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย 10 ชิ้น (จัดส่งในถาด)*

THB1,447.55

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB1,548.88

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 128 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
10 - 48THB144.755
50 - 98THB142.87
100 - 498THB141.05
500 +THB139.305

*ตัวบ่งบอกราคา / price indicative

ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
RS Stock No.:
127-8282P
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
ATMEGA16U2-AU
ผู้ผลิต:
Microchip
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Microchip

Product Type

Microcontroller

Series

ATMEGA16U2

Package Type

TQFP

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

16kB

Interface Type

USART, SPI

Maximum Clock Frequency

16MHz

RAM Size

512bit

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Analogue Comparators

1

Number of Programmable I/Os

22

Maximum Operating Temperature

85°C

Height

1.05mm

Width

7 mm

Length

7mm

Standards/Approvals

No

Minimum Supply Voltage

2.7V

Number of Timers

2

Program Memory Type

FLASH

ADCs

8 x 10 Bit

Instruction Set Architecture

RISC

Automotive Standard

No

Distrelec Product Id

304-29-290

The Microchip ATmega16U2 CMOS 8-bit microcontroller is based the AVR enhanced RISC architecture. It operates on 2.7V to 5.5V voltage supply. The AVR core combines a rich instruction set with 32 general purpose working registers. It features 16K bytes of in-system programmable flash with read-while-write capabilities, 512 Bytes EEPROM, 512 SRAM, 22 general purpose I/O lines, 32 general purpose working registers, two flexible Timer/Counters with compare modes and PWM, one USART, a programmable Watchdog Timer with Internal Oscillator, an SPI serial port, debug wire interface, also used for accessing the On-chip Debug system and programming and five software selectable power saving modes. The Idle mode stops the CPU while allowing the SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset. In Standby mode, the Crystal/Resonator oscillator is running while the rest of the device is sleeping.

Up to 16 MIPS throughput at 16 Mhz

Programming lock for software security

Microcontroller reset on USB Bus reset without detach

USB Bus disconnection on microcontroller request

Master/Slave SPI Serial Interface

Programmable watchdog timer with separate on-chip oscillator

Power-On reset and programmable brown-out detection

Internal calibrated oscillator

External and internal interrupt sources

QFN32 (5x5mm) / TQFP32 packages