Time Electronics 7006 Loop Calibrator Battery

RS Stock No.:: 537-2580
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: 7006
ผู้ผลิต:: Time Electronics

Time Electronics 7006 Loop Calibrator Battery

ยอดรวมย่อย (1 ชิ้น)*

THB20,696.69

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB22,145.46

(รวมภาษีมูลค่าเพิ่ม)

ส่งฟรีหากซื้อเกิน ฿2,500.00

มีในสต็อก

56 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ

ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง

ชิ้น	ต่อหน่วย
1 +	THB20,696.69

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:: 537-2580
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:: 7006
ผู้ผลิต:: Time Electronics

คุณสมบัติ / Specifications

ข้อมูลทางเทคนิค / Technical Data Sheets

Legislation and Compliance

รายละเอียดสินค้า / Product Details

ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ

เลือกทั้งหมด	คุณลักษณะ	ค่า
	Brand	Time Electronics
	Product Type	Loop Calibrator
	Model Number	7006
	Accuracy	±0.1 %
	Battery Type	PP3
	Battery Life	40h
	Power Source	Battery
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	50°C
	Weight	180g
	Length	30mm
	Height	140mm
	Width	65 mm
	Standards/Approvals	No
	Hazardous Area Certification	No

	เลือกทั้งหมด
	Brand Time Electronics
	Product Type Loop Calibrator
	Model Number 7006
	Accuracy ±0.1 %
	Battery Type PP3
	Battery Life 40h
	Power Source Battery
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 50°C
	Weight 180g
	Length 30mm
	Height 140mm
	Width 65 mm
	Standards/Approvals No
	Hazardous Area Certification No

สถานะRoHS: ได้รับการยกเว้น

COO (Country of Origin):: GB

Loop-Mate1 generates 4 to 20 mA or 0 to 10V to simulate loop signals. Audible beeps that change pitch in sympathy with the output level plus auto-stepping through the range simplify a calibration engineer’s job. It has several additional features - it can generate the current using its own internal supply (RX Test mode), or control the current using an external supply (TX Sim mode).

TxSim and RxTest

Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator

Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.

Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.

7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.

Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.

Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.

Features and Benefits Loop-Mate 1:

• 0.1% Accuracy

• TxSim or RxTest mode

• 25 mA max loop supply

• 140 x 65 x 30 mm dimensions

Features and Benefits Loop-Mate 2:

• 4-digit LCD display

• 0.05% accuracy

• RxSim, TxTest, 50mA/50V measure

• 140 x 65 x 30 mm dimensions

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.