STMicroelectronics 1-Channel RS485/RS422 Transceiver, Differential, 8-Pin SO

รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า

มีส่วนลดเมื่อซื้อจำนวนมาก

ยอดรวมย่อย 625 ชิ้น (จัดส่งเป็นม้วน)*

THB52,390.00

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB56,057.50

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
คำสั่งซื้อมูลค่าต่ำกว่า THB2,500.00 (ไม่รวมภาษีมูลค่าเพิ่ม) ค่าจัดส่งเพียง THB250.00
มีในสต็อก
  • 1,925 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
625 - 1245THB83.824
1250 +THB82.534

*ตัวบ่งบอกราคา / price indicative

ตัวเลือกบรรจุภัณฑ์ / Packaging Options :
RS Stock No.:
189-2037P
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
ST3485EIDT
ผู้ผลิต:
STMicroelectronics
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

STMicroelectronics

Product Type

RS485/RS422 Transceiver

Logic Function

Transceiver

IC Type

Line Transceiver IC

Number of Channels

1

Input Type

Differential

Output Type

Differential

Mount Type

Surface

Package Type

SO

Pin Count

8

Minimum Supply Voltage

3V

Maximum High Level Output Current

4mA

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Propagation Delay Time @ CL

50ns

Maximum Low Level Output Current

4mA

Maximum Operating Temperature

125°C

Standards/Approvals

AEC Q001, AEC Q100, AEC Q002, IEC 61000-4-2, AEC Q003

Series

ST3485EI

Length

5mm

Height

1.75mm

Width

6.2 mm

Supply Current

2.2mA

Automotive Standard

AEC-Q100, AEC-Q1, AEC-Q2, AEC-Q3

COO (Country of Origin):
MA
The ST3485EB/EC/EI/EIY device is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST3485E device transmits and receives at a guaranteed data rate of at least 12 Mbps. All transmitter outputs and receiver inputs are protected to ±15 kV air discharge. The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state.

ESD protection

±15 kV air discharge

±8 kV contact discharge

Operate from a single 3.3 V supply - no charge pump required

Interoperable with 5 V logic

1 μA low current shutdown mode max.

Guaranteed 12 Mbps data rate

-7 to 12 V common mode input voltage range

Half duplex versions available

Industry standard 75176 pinout

Current limiting and thermal shutdown for driver overload protection

Guaranteed high receiver output state for floating inputs with no signal present

Allow up to 64 transceivers on the bus

Available in SO8 package