onsemi SECO-NCV7685RGB-GEVB RGB Lighting Evaluation Board Evaluation Board for NCV7685 for AV Display

ดู LED Development Tools ทั้งหมด
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ เนื่องจากผู้ผลิตกำลังจะยกเลิกการผลิตสินค้านี้
RS Stock No.:
248-5402
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
SECO-NCV7685RGB-GEVB
ผู้ผลิต:
onsemi
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

onsemi

Product Type

Evaluation Board

Kit Classification

Evaluation Board

For Use With

AV Display

Featured Device

NCV7685

Kit Name

RGB Lighting Evaluation Board

Standards/Approvals

No

The ON Semiconductor, an evaluation board for RGB LEDs lighting application with BLE in automotive which driven by NCV7685 and controlled by RSL10, It is also an interior or exterior lighting reference design for tail or ambient lights to realize general sequential or high end pixelated LEDs controlling in vehicle network, the user are prefer to use fixed address in multiple NCV7685 application, it leads to add one more procedure to pre−programming each chips address in mass production stage, the board conceived for use as a plug and play environment to testing.

Plug and Play switch and BLE mode to show animations

16 RGB LEDs (48 Channels), each current programmable sources up to 60 mA

Independent PWM duty cycle control for each channel

On−Chip 150,300,600 and 1200 Hz PWM

Logarithmic or linear independent PWM dimming

Diagnostic and protection against open load and under−voltage, over temperature

Dynamic addressing method for no worries in mass production

Rx sensitivity 94 dBm

Transmitting power −17 to +6 dBm

Arm Cortex M3 Processor and LPDSP32

AEC Q100 qualified and PPAP capable

ลิงก์ที่เกี่ยวข้อง