Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW

ดู Isolator Switches ทั้งหมด

ยอดรวมย่อย (1 ชิ้น)*

THB1,631.78

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB1,746.00

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 9 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB1,631.78

*ตัวบ่งบอกราคา / price indicative

RS Stock No.:
805-5584
หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
172834 P1-25/XM
ผู้ผลิต:
Eaton
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

Eaton

Number of Poles

3

Product Type

Isolator Switch

Mount Type

Surface

IP Rating

IP65

Electrical Phase

3

Series

P1-25

Switching Current

190A

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Padlock Compatibility

No

Minimum Operating Temperature

-25°C

Switching Power

13kW

Switching DC Voltage

60V dc

Switching AC Voltage

230V ac

Maximum Operating Temperature

50°C

Length

49mm

Standards/Approvals

CSA, UL, IEC

Hazardous Area Certification

NO

Depth

75mm

Width

70mm

สถานะRoHS: ได้รับการยกเว้น

COO (Country of Origin):
GB

Eaton P1-25/XM


Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• 3 pole

• Auxiliary contact or neutral conductor must be fitted by the user

• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rear mounting

• Features an ambient operating temperature of -25 to +50 °C

• Has a mechanical shock resistance of 15 g

• M4 screw terminal

• Rear mounting

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators


The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.

• Performs local isolation, manual override & safety switch functions

• P1 Series fit a standard front plate of 45 x 45 mm

• For spare rotary thumb stick (black) see stock no. 176-9759

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

ลิงก์ที่เกี่ยวข้อง