onsemi MC74AC273DWR2G Octal D Type Flip Flop IC, CMOS, 20-Pin SOIC
- RS Stock No.:
- 806-2205P
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- MC74AC273DWR2G
- ผู้ผลิต:
- onsemi
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่าย
RS จะไม่สต็อกสินค้านี้อีกต่อไป
- RS Stock No.:
- 806-2205P
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- MC74AC273DWR2G
- ผู้ผลิต:
- onsemi
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | onsemi | |
| Logic Family | AC | |
| Logic Function | D Type | |
| Input Type | TTL | |
| Output Type | CMOS | |
| Output Signal Type | Single Ended | |
| Triggering Type | Positive Edge | |
| Polarity | Non-Inverting | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 20 | |
| Set/Reset | Master Reset | |
| Number of Elements per Chip | 8 | |
| Maximum Propagation Delay Time @ Maximum CL | 12 ns@ 50 pF | |
| Maximum Operating Supply Voltage | 6 V | |
| Dimensions | 12.95 x 7.6 x 2.4mm | |
| Width | 7.6mm | |
| Height | 2.4mm | |
| Maximum Operating Temperature | +85 °C | |
| Propagation Delay Test Condition | 50pF | |
| Minimum Operating Temperature | -40 °C | |
| Length | 12.95mm | |
| Minimum Operating Supply Voltage | 2 V | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand onsemi | ||
Logic Family AC | ||
Logic Function D Type | ||
Input Type TTL | ||
Output Type CMOS | ||
Output Signal Type Single Ended | ||
Triggering Type Positive Edge | ||
Polarity Non-Inverting | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 20 | ||
Set/Reset Master Reset | ||
Number of Elements per Chip 8 | ||
Maximum Propagation Delay Time @ Maximum CL 12 ns@ 50 pF | ||
Maximum Operating Supply Voltage 6 V | ||
Dimensions 12.95 x 7.6 x 2.4mm | ||
Width 7.6mm | ||
Height 2.4mm | ||
Maximum Operating Temperature +85 °C | ||
Propagation Delay Test Condition 50pF | ||
Minimum Operating Temperature -40 °C | ||
Length 12.95mm | ||
Minimum Operating Supply Voltage 2 V | ||
The MC74AC273/74ACT273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) inputs load and reset (clear) all flip-flops simultaneously. The register is fully edge-triggered. The state of each D input, one setup time before the LOW-to-HIGH clock transition, is transferred to the corresponding flip- flop's Q output. All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage level on the MR input. The device is useful for applications where the true output only is required and the Clock and Master Reset are common to all storage elements.
Ideal Buffer for MOS Microprocessor or Memory
Eight Edge-Triggered D Flip-Flops
Buffered Common Clock
Buffered, Asynchronous Master Reset
See MC74AC377 for Clock Enable Version
See MC74AC373 for Transparent Latch Version
See MC74AC374 for 3-State Version
Outputs Source/Sink 24 mA
ACT273 Has TTL Compatible Inputs