RS PRO, 120 °C Enclosure Heater, 12V dc, 20W Output, 20W Input 67mm x 65 mm

ดู Enclosure Heaters ทั้งหมด

ยอดรวมย่อย (1 ชิ้น)*

THB2,520.75

(ไม่รวมภาษีมูลค่าเพิ่ม)

THB2,697.20

(รวมภาษีมูลค่าเพิ่ม)

Add to Basket
เลือกหรือพิมพ์จำนวน
มีในสต็อก
  • 42 ชิ้นพร้อมจัดส่งจากคลังสินค้าต่างประเทศ
ต้องการสินค้าเพิ่มหรือไม่ ระบุจำนวนและคลิก ‘ตรวจสอบวันจัดส่ง’ เพื่อดูข้อมูลเพิ่มเติมเกี่ยวกับสต็อกสินค้าและการจัดส่ง
ชิ้น
ต่อหน่วย
1 +THB2,520.75

*ตัวบ่งบอกราคา / price indicative

ผู้ให้การสนับสนุน
Spend and Earn Rewards with RS PRO
RS Stock No.:
226-3690
ผู้ผลิต:
RS PRO
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด

Brand

RS PRO

Product Type

Enclosure Heater

Output Power

20W

Input Power

20W

Supply Voltage

12V dc

Surface Temperature

120°C

Depth

65mm

Connection Type

M4 Screw/Nuts, 6.3 mm Flat Push-On Receptacles

Width

67mm

IP Rating

IP20

Mounting Position

Back

Standards/Approvals

No

Frequency

60Hz

Nominal Current

1.66A

COO (Country of Origin):
GB

RS PRO Anti-Condensation Enclosure Heater


Introducing the range of RS PRO Enclosure Heaters, specifically designed for use in switch and control gear enclosures, providing a low wattage heater to prevent condensation inside the enclosure that could damage expensive equipment. Each heater has been designed with a vitreous enamelled resistor mounted in a sheet case and offers a removable, perforated steel sheet cover for ease of access. Small and versatile, the range of RS PRO enclosure heaters are the perfect choice for a variety of enclosure heating applications.

Features and Benefits:


  • The range of RS PRO enclosure heaters are designed as high quality, heavy-duty power resistor enclosures (IP20), manufactured from Zinc plated steel with a powder-coated finish for optimum protection

  • They contain a vitreous enamelled resistor that is mounted in a sheet steel case and have a removable perforated sheet steel cover for easy access allowing for quick visual inspection

  • In addition to this, there is a cable entry grommet at each end and M4 terminal screws are provided on the resistor for easy installation

  • They are incredibly versatile heating units that can be used in a range of applications but are especially suited to switch and control gear enclosures

  • This range of RS PRO anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation and frost, and manage temperature fluctuations that could impact the electrical components and equipment housed inside the enclosure

    • Technical Features:


  • Dielectric withstand voltage is 2kV from terminal to ground

  • The temperature coefficient is 50ppm/°C

  • Rated at 1000W continuous at 280°C

  • Desirable to limit the surface temperature of the resistor

  • The rated voltage is 230V

    • Applications:


    Enclosure heaters, also known as anti-condensation heaters, are specifically intended to be used to prevent condensation build-up and offer frost protection in control and equipment enclosures. They are ideal for self-regulating temperature management of electrical components and equipment housed in enclosures that may be exposed to moisture build-up and extreme temperature fluctuations, ensuring the best possible conditions for optimum performance and operation over long-term periods. They are typically used in automation and control gear and industrial industries, specifically for control and switchgear.

    Why RS PRO?


    RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.

    ลิงก์ที่เกี่ยวข้อง