Phoenix Contact RIF-0-RPT-12DC/ 1 Series Interface Relay, DIN Rail Mount, 12V dc Coil, SPST, 1-Pole

Looking for a reliable way to control large electrical circuits? Go with this interface relay from Phoenix Contact. By providing it with 12V DC, you can safely activate or deactivate a connected component with a voltage rating up to 250V AC/DC. The unit typically draws just 16mA, so you can trust it to use minimal power.
Mounting the relay's a breeze – just snap it straight onto a DIN rail in any position. As it's tested up to 6kV, it holds up against sudden electrical surges. You can put it to work in harsh settings, thanks to a broad operating temperature range between -40°C and +60°C. You'll find devices like this commonly used in automation networks and powerful radio-electronic installations.

• Rated service life of around 20 million cycles, so it's highly reliable
• Bright yellow LED display lets you monitor operating voltage at a glance
• Accepts conductors in a cross-section range between 0.14 and 1.5mm² for wiring flexibility
• Measures just 6.2 (W) x 93 (H) x 66mm (D), so it's suitable for tight areas
• IP20 rating on the base means it's touch-proof and shielded from objects larger than 12mm