การค้าหาล่าสุด / Recently searched

    Bosch HSS Twist Drill Bit, 1mm Diameter, 34 mm Overall

    ราคา / Price Each: (In a Pack of 10)**

    THB54.878

    (ไม่รวมภาษีมูลค่าเพิ่ม)

    THB58.719

    (รวมภาษีมูลค่าเพิ่ม)

    เลือกหรือพิมพ์จำนวน
    70 มีของพร้อมจัดส่งภายใน (In stock for delivery within) 4-6 วันทำการ (working days)*

    * วันที่จัดส่งอาจเปลี่ยนแปลงได้ตามจำนวนสินค้าที่คุณเลือกหรือที่อยู่จัดส่งของคุณ

    Units
    ต่อหน่วย
    ต่อแพ็ค**
    10 +THB54.878THB548.78

    **ตัวบ่งบอกราคา / price indicative

    RS Stock No.:
    768-3141
    หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
    2608585872
    ผู้ผลิต / Manufacturer:
    Bosch

    Bosch HSS-Co Cobalt Drill Bits (DIN 338)


    Introducing the series of HSS-Co (Cobalt) Drill Bits from Bosch. These high-performance drill bits are manufactured from alloyed high-speed steel to DIN 338 with 5% cobalt content making them resistant to heat and wear, making them ideal for use in tough and hard steels. The HSS-Co drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. These drills are ideal for use with pillar drills and drill stands.

    Features and Benefits:


    • Features self-centring split-point for excellent positional accuracy and hole quality
    • 135° point angle design for maximum accuracy of application
    • No pre-punch or pilot required
    • Precision ground for a faster drilling rate and lower feed pressure
    • Spiral helix enables rapid swarf removal
    • Suitable for drilling in alloyed and non-alloyed steel up to tensile • strength of 1000N/m2
    • Suitable for both hand and machine use

    Approvals & Certification:


    • DIN338/1414
    • Bosch Standard Quality

    Typical Applications:


    These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials.

    FAQs:


    Can these drill bits be used with any SDS drill?
    No, they are standard drills, will not fit into SDS chuck

    What does jobber mean?
    The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.

    What are HSS and HSS-Co?
    An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-Co (cobalt) drills bits are manufactured with the addition of 5% cobalt content that increases heat resistance and wears making them ideal for use with tough and hard steels.

    ลิงก์ที่เกี่ยวข้อง