Siemens Data Acquisition Connector for Use with IE FC TP Cables 4x2, Suitable for Fast Assembly with the FastConnect

This data acquisition connector provides a Compact RJ45 Interface for Industrial Ethernet installations, designed for use with 4x2 IE FC TP cables and Rapid assembly using a dedicated FastConnect method. It is intended for industrial communications where a robust metal-bodied plug with 180° cable outlet is required, supporting high-speed network links up to 10Gbit/s and enabling sealed, strain-relieved connections in control and automation environments.

• Category 6A support enables 10000Mbit/s network throughput
• Integrated insulation-displacement contacts permit AWG24 and AWG22 use
• Metal enclosure provides enhanced mechanical protection and durability
• FastConnect compatibility reduces assembly time on-site
• PoE and PoE+ capable allow simultaneous power and data delivery

• Suitable for connecting IE FC TP cables 4x2 in machine control racks
• Used with fieldbus and Ethernet networks in factory automation
• Ideal for installations requiring 180° cable routing in cabinets
• Used for Rapid on-site terminations where reduced downtime is needed
• Suitable for PoE device wiring such as sensors and cameras

The design supports up to 10 reuse cycles for repeated mating operations.

It accommodates cable diameters of 6.5 to 8 mm and conductor cross-sections from 0.21 to 0.33 mm².

The unit tolerates temperatures between -40°C to +85°C for storage and transit.

The connector conforms to an IP20 protection classification in its installed state.

The connector is silicon-free and conforms to RoHS and REACH requirements.