Skyworks Solutions Inc Differential Current Shunt Monitor Single 8-Pin DIP
- RS Stock No.:
- 169-0202
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- SI8920AC-IP
- ผู้ผลิต:
- Skyworks Solutions Inc
รูปภาพประกอบสินค้าเป็นเพียงรูปภาพใกล้เคียงเท่านั้น กรุณาอ่านรายละเอียดสินค้า
ไม่พร้อมจำหน่ายในตอนนี้
เราไม่ทราบว่าสินค้านี้จะกลับมาในสต็อกหรือไม่ RS ตั้งใจที่จะลบสินค้านี้ออกจากกลุ่มผลิตภัณฑ์ในเร็วๆ นี้
- RS Stock No.:
- 169-0202
- หมายเลขชิ้นส่วนของผู้ผลิต / Mfr. Part No.:
- SI8920AC-IP
- ผู้ผลิต:
- Skyworks Solutions Inc
คุณสมบัติ / Specifications
ข้อมูลทางเทคนิค / Technical Data Sheets
Legislation and Compliance
รายละเอียดสินค้า / Product Details
ค้นหาผลิตภัณฑ์ที่คล้ายกันโดยเลือกคุณลักษณะอย่างน้อยหนึ่งรายการ
เลือกทั้งหมด | คุณลักษณะ | ค่า |
|---|---|---|
| Brand | Skyworks Solutions Inc | |
| Power Supply Type | Single | |
| Product Type | Current Shunt Monitor | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 2 | |
| Supply Current | 5.5mA | |
| Mount Type | Through Hole | |
| Package Type | DIP | |
| Pin Count | 8 | |
| GBP - Gain Bandwidth Product | 950kHz | |
| Minimum Operating Temperature | -40°C | |
| Width | 6.6 mm | |
| Series | Si8920 | |
| Height | 3.44mm | |
| Standards/Approvals | No | |
| Length | 9.9mm | |
| Maximum Operating Temperature | 125°C | |
| Output Type | Differential | |
| Automotive Standard | AEC-Q100 | |
| เลือกทั้งหมด | ||
|---|---|---|
Brand Skyworks Solutions Inc | ||
Power Supply Type Single | ||
Product Type Current Shunt Monitor | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 2 | ||
Supply Current 5.5mA | ||
Mount Type Through Hole | ||
Package Type DIP | ||
Pin Count 8 | ||
GBP - Gain Bandwidth Product 950kHz | ||
Minimum Operating Temperature -40°C | ||
Width 6.6 mm | ||
Series Si8920 | ||
Height 3.44mm | ||
Standards/Approvals No | ||
Length 9.9mm | ||
Maximum Operating Temperature 125°C | ||
Output Type Differential | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- TH
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is Ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS N/A). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
The Si8920 is available in 4 variants:
Si8920AC-IP (RS 901-3967) with an input range of ±100 mV in a Gull-Wing DIP-8 package
Si8920BC-IP (RS 901-3976) with an input range of ±200 mV in a Gull-Wing DIP-8 package
Si8920AD-IS (RS 901-3979) with an input range of ±100 mV in a SOIC-16 package
Si8920BD-IS (RS 901-3973) with an input range of ±200 mV in a SOIC-16 package
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low Value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.