Molex CP-6.5 Series Female Crimp Terminal, 26AWG Min, 20AWG Max

A range of crimp receptacle terminals for use with the CP-6.5 6.5mm series crimp receptacle housings. These crimp receptacle terminals are tin plated and are available with a 16-22 AWG wire size (50598 series) and a 20-26 AWG wire size (50598 series).
A hand crimp tool is available for crimping 50598 series 22-26 AWG terminals, see stock number 905-9925

To power up an electrical circuit on your PCB, reach for this crimp terminal from Molex. It's a simple but essential device that's designed to attach a wire to your board to transmit current from one point to another. Its robust copper alloy contact material is highly conductive, so you get steady and stable power and signal transmissions. For a power boost, the terminal comes with durable tin plating that shrugs off corrosion.

• Compatible with a CP-6.5 connector housing (such as 905-9887) to prevent dirt contamination
• Fits wire size range between 26 and 20AWG for versatility

• Lighting control
• Household appliances
• Robotics systems

You crimp your wire to this terminal by using a hand crimping tool (905-9925) from Molex. Insert the stripped end of the conductor into the barrel, then turn the ratchet mechanism till you get a full crimping cycle.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Molex CP-6.5 6.5mm Wire-to-Board Connectors